Omega2+: reboot and sd card fixed!
@WereCatf sorry, figured out that the latest system is too lazy. it didn't mount the sd card.
I solve it by creating a new folder and using mount command.
I also edited my previous post with the missing information
With v1.9 firmware, the SD is automounted at
and if you have a second partition it will be mounted at /tmp/mounts/SD-P2 etc
i'm new in this field , just start from several days , im facing problem with my SD , may be im not searching well but when i open the status , no change in storage amount ,
any help plz ?
what is the cmd should use it to check that ?
We just released a quick tutorial on how to work with SD cards here: Using a MicroSD Card.
Using a MicroSD Card
I'm assuming that the card needs to be pre formatted to FAT 32 or something similar? The tutorial makes no mention of supported formats hence the question.
I use a Mac at home so if I format any cards I would need to ensure that I choose an appropriate option.
Mine was read/writable when i plugged in. It came Fat32 formatted.
If you want to use it as a boot able memory you need to format it to ext4.
Here's a tutorial of how I'm using the SDCARD on my device. My use-case is pretty specific, though you can modify my instructions to your own needs.
I applied the latest update, per your instructions, then decided I'd set up my SD Card per:
For some reason, while the "block detect" command did come up with a useful output, I couldn't redirect that output to /etc/config/fstab - So I did it manually!
However, despite working through all of that, on reboot the Omega 2+ I have doesn't remember there was an SD card in the slot! I have to eject the SD Card, and reinsert it, and then the OS sees it.
Which means that I can't boot from it....
I have the same problem that the last comment