We have upgraded the community system as part of the upgrade a password reset is required for all users before login in.

bluetoothctl not found



  • Hello,
    I'm running an Onion Omega2 on Arduino Dock 2 with a USB Hub that adds a USB drive (successfully mounted, as shown by df -h) and a BLE expansion. I run the standard steps to enable bluetooth but get the following output:
    root@Omega-9F38:~# hciconfig -a
    hci0: Type: Primary Bus: USB
    BD Address: 00:1A:7D:DA:71:13 ACL MTU: 310:10 SCO MTU: 64:8
    UP RUNNING PSCAN ISCAN
    RX bytes:1160 acl:0 sco:0 events:62 errors:0
    TX bytes:744 acl:0 sco:0 commands:62 errors:0
    Features: 0xff 0xff 0x8f 0xfe 0xdb 0xff 0x5b 0x87
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
    Link policy: RSWITCH HOLD SNIFF PARK
    Link mode: SLAVE ACCEPT
    Name: 'CSR8510 A10'
    Class: 0x000000
    Service Classes: Unspecified
    Device Class: Miscellaneous,
    HCI Version: 4.0 (0x6) Revision: 0x22bb
    LMP Version: 4.0 (0x6) Subversion: 0x22bb
    Manufacturer: Cambridge Silicon Radio (10)

    root@Omega-9F38:~# hciconfig hci0 up
    root@Omega-9F38:~# hciconfig hci0 sspmode enable
    root@Omega-9F38:~# hciconfig hci0 piscan
    root@Omega-9F38:~# bluetoothctl
    -ash: bluetoothctl: not found

    I had previously installed bluez-utils successfully. Any reason why bluetoothctl should not be found?

    Thanks,
    A C


Log in to reply
 

Looks like your connection to Community was lost, please wait while we try to reconnect.