Issue with wifisetup
I've been unable to connect to local WiFi network in order to update and install packages to my Omega2+.
Can anyone provide guidance on what is preventing wifisetup from successfully establishing a connection?
@Joseph-Cierniewski Wow! Your v0.1.5 b130 (release date November 22, 2016) firmware is very old. Who remembers those days?
Try to upgrade it - for example - with this method Firmware Flashing from USB Storage - let's say to v0.1.10 b160 (with Mediatek WiFi driver) or to the latest v0.2.2 b201 (with the new Onion Warp Core WiFi driver).
(You know 'omega2' for Omega2 and 'omega2p' for Omega2+.)
Thanks for the suggestion - I'll try upgrading the firmware when I get some time. I'll let you know if it works.
Well I tried your suggestion to reflash with the latest firmware revision.
Now I have a new problem - system is unable to read firmware file from USB storage device.
I tried several times to perform this operation, reformatting USB storage to FAT-32 as specified in "Firmware Flashing From USB Storage" then copying downloaded firmware file renamed omega2.bin to the device, to no avail.
I'm considering getting an Ethernet expansion to upgrade the firmware via a direct network connection.
Never had this much difficulty with other SBCs, very frustrating ...
@Joseph-Cierniewski If I were you I'd try another USB stick too ;-)
There is another possibility.
You should copy the dowloaded firmware into Omega's /tmp directory somehow.
PuTTY has a Secure Copy Client (PSCP) or try to copy that file from your USB stick.
Run these commands on the Serial Console:
BTW Perhaps the FW upgrade will solve your original problem ... but I'm not fully sure.
Code block - instead of screenshot.
Put a line with
```(three back ticks) before and put a line with
```(three back ticks) after your text.
This is a code block. For example on PuTTY's Serial Console click to 'Copy All to Clipboard' and paste it to here. Unfortunately the code highlighting of this block is terrible.