ERROR!!! CntlEnqueueForRecv: BlockAck Request frame length size = 44 incorrect



  • I have this problem, and the wifi isn't conect to the routers when I have an i change the ip but nothing. I'm sorry for my Inglish

    root@Omega-ABCD:/# [ 732.772567] br-wlan: port 1(ra0) entered disabled state
    [ 732.792873] device ra0 left promiscuous mode
    [ 732.797385] br-wlan: port 1(ra0) entered disabled state
    [ 732.856265] IPv6: ADDRCONF(NETDEV_UP): br-wlan: link is not ready
    [ 736.138250] device ra0 entered promiscuous mode
    [ 736.142992] br-wlan: port 1(ra0) entered forwarding state
    [ 736.148595] br-wlan: port 1(ra0) entered forwarding state
    [ 736.155874] IPv6: ADDRCONF(NETDEV_CHANGE): br-wlan: link becomes ready
    [ 738.144472] br-wlan: port 1(ra0) entered forwarding state
    [ 738.440701] Interface apcli0 link up! (WPA2PSK AES)
    [ 738.456466] ERROR!!! CntlEnqueueForRecv: BlockAck Request frame length size = 44 incorrect
    [ 747.319082] ERROR!!! CntlEnqueueForRecv: BlockAck Request frame length size = 44 incorrect
    [ 749.801617] ERROR!!! CntlEnqueueForRecv: BlockAck Request frame length size = 44 incorrect
    [ 881.483960] ERROR!!! CntlEnqueueForRecv: BlockAck Request frame length size = 44 incorrect



  • Someone knows how to solve this problema?

    FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.



  • @alfa-beta Run these commands please:
    opkg update
    opkg install dosfstools
    fsck.fat /dev/mmcblk0p1

    Omega version ??? Omega's firmware version ???
    Some details would be nice ;-)

    Good luck.



  • Sorry and thanks. But the problema is not solved.

    Omega 2 +
    Device Firmware Version: 0.2.2 b200

    /# opkg update
    Downloading http://repo.onion.io/omega2/packages/core/Packages.gz
    Updated list of available packages in /var/opkg-lists/omega2_core
    Downloading http://repo.onion.io/omega2/packages/core/Packages.sig
    Signature check passed.
    Downloading http://repo.onion.io/omega2/packages/base/Packages.gz
    Updated list of available packages in /var/opkg-lists/omega2_base
    Downloading http://repo.onion.io/omega2/packages/base/Packages.sig
    Signature check passed.
    Downloading http://repo.onion.io/omega2/packages/packages/Packages.gz
    Updated list of available packages in /var/opkg-lists/omega2_packages
    Downloading http://repo.onion.io/omega2/packages/packages/Packages.sig
    Signature check passed.
    Downloading http://repo.onion.io/omega2/packages/routing/Packages.gz
    Updated list of available packages in /var/opkg-lists/omega2_routing
    Downloading http://repo.onion.io/omega2/packages/routing/Packages.sig
    Signature check passed.
    Downloading http://repo.onion.io/omega2/packages/onion/Packages.gz
    [ 81.109794] ERROR!!! CntlEnqueueForRecv: BlockAck Request frame length size = 44 incorrect
    [ 81.118300] ERROR!!! CntlEnqueueForRecv: BlockAck Request frame length size = 44 incorrect
    Updated list of available packages in /var/opkg-lists/omega2_onion
    Downloading http://repo.onion.io/omega2/packages/onion/Packages.sig
    Signature check passed.

    Unknown package 'dosfstools'.
    Collected errors:

    • opkg_install_cmd: Cannot install package dosfstools.


  • I try whit git download it but is impossible.

    Cloning into 'dosfstools'...
    fatal: Unable to find remote helper for 'https'



  • @alfa-beta Enable / uncomment the 'http://downloads.lede-project.org/releases/17.01-SNAPSHOT/packages/mipsel_24kc/packages' line (the 5th line) in the '/etc/opkg/distfeeds.conf' file.

    # Omega2+  FW v0.2.2 b200
    
    root@Omega-5BE1:/# cat /etc/opkg/distfeeds.conf
    #src/gz reboot_core http://downloads.lede-project.org/releases/17.01-SNAPSHOT/targets/ramips/mt7688/packages
    #src/gz reboot_base http://downloads.lede-project.org/releases/17.01-SNAPSHOT/packages/mipsel_24kc/base
    #src/gz reboot_onion http://downloads.lede-project.org/releases/17.01-SNAPSHOT/packages/mipsel_24kc/onion
    ## src/gz reboot_luci http://downloads.lede-project.org/releases/17.01-SNAPSHOT/packages/mipsel_24kc/luci
    src/gz reboot_packages http://downloads.lede-project.org/releases/17.01-SNAPSHOT/packages/mipsel_24kc/packages
    ## src/gz reboot_routing http://downloads.lede-project.org/releases/17.01-SNAPSHOT/packages/mipsel_24kc/routing
    ## src/gz reboot_telephony http://downloads.lede-project.org/releases/17.01-SNAPSHOT/packages/mipsel_24kc/telephony
    src/gz omega2_core http://repo.onion.io/omega2/packages/core
    src/gz omega2_base http://repo.onion.io/omega2/packages/base
    src/gz omega2_packages http://repo.onion.io/omega2/packages/packages
    src/gz omega2_routing http://repo.onion.io/omega2/packages/routing
    src/gz omega2_onion http://repo.onion.io/omega2/packages/onion
    
    root@Omega-5BE1:/# opkg update
    Downloading http://downloads.lede-project.org/releases/17.01-SNAPSHOT/packages/mipsel_24kc/packages/Packages.gz
    Updated list of available packages in /var/opkg-lists/reboot_packages
    Downloading http://downloads.lede-project.org/releases/17.01-SNAPSHOT/packages/mipsel_24kc/packages/Packages.sig
    Signature check passed.
     ...
    
    root@Omega-5BE1:/# opkg install dosfstools
    Installing dosfstools (4.0-2) to root...
    Downloading http://downloads.lede-project.org/releases/17.01-SNAPSHOT/packages/mipsel_24kc/packages/dosfstools_4.0-2_mipsel_24kc.ipk
    Configuring dosfstools.
    
    

    BTW this will not resolve your original problem because it is a WiFi network / protocol issue.



  • @György-Farkas. Thanks i repair the directory and reset the firmware. And problems is solved.



  • @alfa-beta

    Hello,
    it looks like i have the same problem.
    Can you please explain the steps you did in order to solve the problem ?

    That would be very helpful.

    Thanks
    Yann



  • @magouero You paste/enter in the console:

    vim /etc/opkg/distfeeds.conf
    

    This opens the configuration called "distfeeds" in the vim console text editor.
    When this file is open, you simply delete the hashtag before the fifth line (should end with "SNAPSHOT/packages/mipsel_24kc/packages"). Note, on some keyboards the backwards arrow which would delete a letter in Word wont do anything, if this is your case, just highlight the hashtag and look for a key on your keyboard where "Delete" or "Del" is actually readable on it.

    When the hashtag is deleted:

    press ESC once
    type ":wq" without quotes and press enter. This saves and quits vim; You should get the root-Omega-XXXX:/ back

    Now retry

    opkg update
    opkg install dosfstools
    fsck.fat /dev/mmcblk0p1
    

    Hope this helps



  • @Maico-Valcke-0 If you only have problems with the wifi, you dont need the last one (fsck.fat /dev/mmcblk0p1) but you can go straight to the wifisetup command



Looks like your connection to Community was lost, please wait while we try to reconnect.