Hi, I just received the onion few days ago, and I still confused with the h/w quality and the getting started page.
I received the onion omega with one pin is already bent from the beginning
(this is the photo that I've taken before I used it)
![IMG_20151105_100335.jpg](/uploads/files/1446692922798-img_20151105_100335.jpg)
Since this is probably an easy problem (only need to make it straight, I'll just skip this part)
but the second is....
Till today, I still can't connect to the h/w, either I'm wrong or... there's something wrong with the h/w
I already connected to the wifi (ONION-ABCD) and can browse into the ONION-ABCD.local (which is stated @ getting started), but the Wizard is only shown like this
(Power on with Onion Omega connected to Mini-Dock with microUSB-USB connected to PC)
![Screen Shot 2015-11-05 at 10.28.23 AM.png](/uploads/files/1446694128219-screen-shot-2015-11-05-at-10.28.23-am.png)
(Tested using the Safari, Firefox v41.0.2, 42.0 on OSX El Capitan 10.11.1, and from Android Web Browser, all same result, wizard not asking for login)
so... idk how to connect to this omega, is this my fault / stupidity or h/w fault?
Thanks.... i need the direction to use this omega @.@
Updated:
I tried to use the screen from OSX Terminal after installing the driver
This one
Silicon Labs CP2102 driver from https://www.silabs.com/Support Documents/Software/Mac_OSX_VCP_Driver.zip.
and after write the
screen /dev/tty./dev/tty.SLAB_USBtoUART 115200
it only shows blank page
![Screen Shot 2015-11-05 at 10.34.26 AM.png](/uploads/files/1446694602182-screen-shot-2015-11-05-at-10.34.26-am.png)
So.... I can't connect to the device at all...
Need "enlightment" in order to use this device...