@John-W Hey John,
Have you tried connecting to any other networks besides your home network? If not, maybe try tethering off of your phone jut to test it? You might also want to check the frequency of the network, I'm almost certain the Omega's only support 2.4GHz, not 5.0.
Success! The CLI proved to be a lot more robust at setting things up - it reconnects successfully on reboots now
Cheers guys
@WereCatf Yeah I've made sure the SSID's are unique. As for the subnets, the Omega is on stock (192.168.3.x) and my router is on 192.168.0.x. It does initially connect successfully but it just refuses to reconnect after a reboot. I'm going to be visiting some friends for the next little bit so I'll give it a try on some other networks and see if that works.
@John-W Hey John,
Have you tried connecting to any other networks besides your home network? If not, maybe try tethering off of your phone jut to test it? You might also want to check the frequency of the network, I'm almost certain the Omega's only support 2.4GHz, not 5.0.
@WereCatf Yes I've gone into my router settings and checked and it doesn't show up there either. Only works immediately after the initial set up. I've also checked cloud.onion.io and that reflects the time on/offline supporting that it never reconnects to the network after rebooting.
Hey everyone,
I'm having a strange issue:
When I first set up my Omega2+, in walking through the initial set up I m able to connect to my WiFi network correctly. I can check for updates, and also install the terminal and file browser modules through the GUI accesssed at <<hostname>>.local. Thereafter, everytime I reboot the Omega2+, I can only access it using it's AP: It does not ever reconnect to my network. It I access the GUI (whilst connected to the AP) I can see that it still has the network saved in the corresponding section, but the checkbox that seemingly enables\disables Wifi capabilities remains unchecked when i check it, switch to another section of the GUI, and then return to the appropriate section.
Any ideas on why it keeps going into AP mode? I've made sure the network is in range. If I do a factory reset, the issue repeats: I can connect successfuly during the initial setup process but thereafter the credentials are stored but the Omega2+ never reconnects to the nwtwork no matter how many reboots are performed.
Thanks for any help you guys can offer,
Nelly