My first Omega2 project! Written up here.

Maybe it will help others do other cool things!

@radio1039 If you get this working, definitely come back with a write up! I would love to try this out, it is on my list for future experimentation.

@Lazar-Demin Keep the great 2 Bullet Tuesday content coming!

My first Omega2 project! Written up here.

Maybe it will help others do other cool things!

Are you following the tutorial for first time setup here?

Accurate diagnosis @WereCatf , thanks! I had assumed a device right from the factory would have the latest firmware on it but it is indeed using the 0.1.5 b130. Maybe that is @Ajay-Kumar's problem too, hope this helps.

Perhaps I have answered my own question - leaving the Omega2+ alone for a couple of hours, coming back and finding the progress bar showing no progress at all I was disappointed. However, reloading the page took me to the normal sign in screen - maybe the progress bar is broken but the update works anyway.

Loving the size and potential of my new Omega2+. Is it a problem that the MAC address on the box and the sticker on the board don't match the MAC address reported by the device itself?

I have the same situation - got the Omega2 today, plugged in and started through the setup (following instructions here. Get to the firmware update and it hangs, after 30 minutes no progress on the progress bar. The instructions say "this process takes several minutes."

How long is the firmware update supposed to take?