Whenever I try to register my Omega I get asked to insert my credentials in the log in page (which BTW is pretty tiny... it could be larger), but when I press 'Log In' it asks me again to write username and password a second time.

I'm sorry you invested in so many omegas. The only thing I was able to do in the last couple of years with my omega was swearing my way to hell. Every time I boot it a new bug comes up.

Just upgraded my onion. I'm not greeted with the log in form anymore. The guided setup shows up instead but when I reach the log in page the Login button doesn't work.

I should have increased the storage size following the instructions in the docs and this is what I get with df -h

root@Omega-616B:~# df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                 5.8M      5.8M         0 100% /rom
tmpfs                    61.4M     25.2M     36.1M  41% /tmp
/dev/mmcblk0p1            3.5G     63.2M      3.3G   2% /overlay
overlayfs:/overlay        3.5G     63.2M      3.3G   2% /
tmpfs                   512.0K         0    512.0K   0% /dev
/dev/sda1                14.9G      2.0G     13.0G  13% /mnt/sda1

I've increased the storage with a 4 GB SD and added a 2 GB swap inside a 16GB USB.

However when I run pip3 install pandas I get:

root@Omega-616B:~# pip3 install pandas
Collecting pandas
  Downloading https://files.pythonhosted.org/packages/27/85/f9e4f0e47a6f1410b1d737b74a1764868e9197e3197a2be843507b505636/pandas-0.23.1.tar.gz (13.1MB)
    100% |████████████████████████████████| 13.1MB 2.8kB/s 
Exception:
Traceback (most recent call last):
  File "/usr/lib/python3.6/site-packages/pip/basecommand.py", line 214, in main
    status = self.run(options, args)
  File "/usr/lib/python3.6/site-packages/pip/commands/install.py", line 299, in run
    requirement_set.prepare_files(finder)
  File "/usr/lib/python3.6/site-packages/pip/req/req_set.py", line 370, in prepare_files
    ignore_dependencies=self.ignore_dependencies))
  File "/usr/lib/python3.6/site-packages/pip/req/req_set.py", line 587, in _prepare_file
    session=self.session, hashes=hashes)
  File "/usr/lib/python3.6/site-packages/pip/download.py", line 810, in unpack_url
    hashes=hashes
  File "/usr/lib/python3.6/site-packages/pip/download.py", line 653, in unpack_http_url
    unpack_file(from_path, location, content_type, link)
  File "/usr/lib/python3.6/site-packages/pip/utils/__init__.py", line 605, in unpack_file
    untar_file(filename, location)
  File "/usr/lib/python3.6/site-packages/pip/utils/__init__.py", line 578, in untar_file
    shutil.copyfileobj(fp, destfp)
  File "/usr/lib/python3.6/shutil.py", line 76, in copyfileobj
    fdst.write(buf)
OSError: [Errno 28] No space left on device

I'd like to use the sd card for every file needed by the system to run stuff like python and its libraries for example, and on the usb I'd like to keep my files like a home folder. For the latter I thought I'd make a homedirectory inside the usb drive and add a symlink to the root directory but I'm not sure it's the right way to accomplish what I want.

The link for the linux version of the driver is dead.

For future reference. I had the same problem, solved with a reboot.

When I go into the Web App Terminal I get a connection denied on 192.168.3.1 even though everything else seems to be working fine.

Whenever I try to register my Omega I get asked to insert my credentials in the log in page (which BTW is pretty tiny... it could be larger), but when I press 'Log In' it asks me again to write username and password a second time.

@WereCatf It works!

Thank you very much!
I apologize if I made a bigger problem than it really was.

@WereCatf how much can the omega withstand with the mini board? Can I use the power supply of the raspberry pi ? (5V 2.5A)

@WereCatf I flashed the imaged a second time and got it working, but when I loaded the latest firmware it froze again at

[ 17.490148] EEPROM:Read from [factory] offset 0x0,length 0x400.