@Brad-Buskey Line 51 in showgps.py is missing a : at the end.

I think the issue is either software related or hardware specific to the Omega dock. If I connect the GPS expansion to a Raspberry Pi I can lock onto a satellite.

With the latest update to ogps I am now able to lock onto a satellite.

UPDATE: Unfortunately I only managed to lock onto a GPS once.

Anybody managed to get the GPS Expansion working?

I also have the same issue being unable to lock onto a satellite both indoors and outdoors.

@Brad-Buskey Line 51 in showgps.py is missing a : at the end.

Thanks @Boken-Lin

Hi @Boken-Lin - my address is still the same. Attached are two shots of the top/bottom of Omega.

Hi @Boken-Lin - Omega was off before connecting to serial terminal.

@Boken-Lin Micro-USB is connected to my MacBook Pro. When connecting to serial terminal I get the following:

.Hornet USB booting...
VID=0xcf3,PID=0x9330

iManufacturer=0x10,iProduct=0x20,iSerialNumber=0x30

bMaxPower=0xfa

-> COLD_START
bUSBPhyBias=0x3

RUN
Default State
HS

HS

HS

HS

HS

If I connect the Omega to the mini dock and repeat the same steps all I get on the serial terminal is a dot '.' I have tried other micro usb cables and also tried to connect with another Mac. Omega was working fine prior to last weekend.