@Lazar-Demin I had exactly the same issue with one omega which I did not upgraded for a while. It was firmware 0.0.4.

wget and sysupgrade worked without problem.

I was struggling with the possibility to easy access pins on the mini dock (like GPIO or use just two pins for the 3.3 VIN instead of the USB for power). Finally I soldered two female header sockets from the backside 90° tilted and it works pretty good:

Done.
And please add some confirmation page at the end of survey!

Also I miss the optional field to enter my contact details if needed.

@Kit-Bishop yep I know about it. This will be of course much better and non-invasive way. But up to my knowledge is not yet available and this hack was done in 5 minutes

@Lazar-Demin I had exactly the same issue with one omega which I did not upgraded for a while. It was firmware 0.0.4.

wget and sysupgrade worked without problem.

Done.
And please add some confirmation page at the end of survey!

Also I miss the optional field to enter my contact details if needed.

@Kit-Bishop yep I know about it. This will be of course much better and non-invasive way. But up to my knowledge is not yet available and this hack was done in 5 minutes

I was struggling with the possibility to easy access pins on the mini dock (like GPIO or use just two pins for the 3.3 VIN instead of the USB for power). Finally I soldered two female header sockets from the backside 90° tilted and it works pretty good:

I have a problem with the console on my mobile. Login page is fine, but the app icons overflows the screen and there is no scrollbar.
However I found an easy solution, just add this to the /www/elements/onion-styles/onion-styles.css :

#appContainer {
    overflow-y: scroll!important;
}

The coincidence is, that is some browsers you have grey vertical scrollbar (or two) even if the screen is big, but actually I am fine with that.
Maybe it is good idea to include it in the new release.

Thanks a lot @Boken-Lin, I just wanted to know if I did not miss something.
I understand that you are very busy with other stuff and I am not working on something so important. So fingers crossed with all ONION features, it looks great!

In python I just had idea how to use it. Principally I can use whatever language. Is there any example of using I2C protocol?

Hi,
I received my Omega today and it is working! I did not realized, that Minidock is not build to connect to other devices and Arduino dock as well. Anyway, I connected one spare light sensor via I2C and I can read the values using i2ctools.
But I can't access it from python since python-smbus package is missing. You are using smbus library in Python-I2C/onion/I2C.py code at github. How can I get this compiled library for my Omega?

Thanks!

@Boken-Lin so this will be just cheap plate which you can put in between omega and minidock to have access to the connectors?
My battery dock is postponed. Will it be possible to ship it later with these plates (just not to pay shipping just for this)?