Hello,

I'm trying to record video from my usb webcam to make a dashcam, so I have installed motion with opkg. By default motion create correct pictures but after I have modified the configuration like this:

max_movie_time 600
emulate_motion on
output_pictures off
target_dir /tmp/run/mountd/mmcblk0p1

but motion don't create anything.
Also I have an error when I start motion, maybe it's part of the solution?

root@Omega-C3FD:/etc/motion# motion
[0] [NTC] [ALL] conf_load: Processing thread 0 - config file /etc/motion/motion.conf
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "ffmpeg_output_movies"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "ffmpeg_output_debug_movies"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "ffmpeg_timelapse"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "ffmpeg_timelapse_mode"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "ffmpeg_bps"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "ffmpeg_variable_bitrate"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "ffmpeg_video_codec"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "ffmpeg_deinterlace"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "movie_filename"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "timelapse_filename"
[0] [NTC] [ALL] motion_startup: Motion 3.4.0-Git-78ba2da Started
[0] [NTC] [ALL] motion_startup: Logging to file (/tmp/run/mountd/mmcblk0p1/motion.log)

Thanks for your help

Ok so it's normal, thank you

Hello,

I have an Omega2+ that works correctly but the /dev/root that is mounted in /rom is full, I have already do the factory reset but nothing change.

root@Omega-C3FD:/rom/lib/modules/4.4.46# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 5.5M 5.5M 0 100% /rom
tmpfs 61.4M 96.0K 61.3M 0% /tmp
/dev/mtdblock6 25.1M 2.7M 22.4M 11% /overlay
overlayfs:/overlay 25.1M 2.7M 22.4M 11% /
tmpfs 512.0K 0 512.0K 0% /dev

Someone can help me with this?

Thanks in advance