Hi all,
I have board that have on onion omega2s+ module. I wanted to change custom openwrt image instead of default firmware.
I coppied .bin file to module and i run command below.

$ sysupgrade -n openwrt-ramips-mt76x8-onion_omega2p-squashfs-sy
supgrade.bin

i faced

and i looked at proc/cpuinfo for being sure

system type		: MediaTek MT7688 ver:1 eco:2
machine			: Onion Omega2 LTE
processor		: 0
cpu model		: MIPS 24KEc V5.5
BogoMIPS		: 385.84
wait instruction	: yes
microsecond timers	: yes
tlb_entries		: 32
extra interrupt vector	: yes
hardware watchpoint	: yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
isa			: mips1 mips2 mips32r1 mips32r2
ASEs implemented	: mips16 dsp
shadow register sets	: 1
kscratch registers	: 0
package			: 0
core			: 0
VCED exceptions		: not available
VCEI exceptions		: not available

i do not understand, module tag is omega2s+.

Thanks for any help.

@crispyoz Thank you for your interest. I fixed this error. I cloned basic station again and i copied onion.patch file it was fixed but now i have another problem

Yeap , i tried

I built basic station for linux x86 architecture, but i cannot build for my embedded device that has mips architecture.

i found this variable in /basicstation/deps/lgw/patch-{platform}.patch

I do not have any idea about how .patch files works.
i created for my platform and also i edited setup.gmk file for my platform but it does not work.

Hi everyone,

I uploaded the OpenWRT firmware on my onion omega2 board but now i want to revert that. How could i do that ?

Any suggestion would be appreciated.
Thank you.

I am pretty newbie on onion. Is there so much different using windows or linuxOS for long term.