@crispyoz Here are some things I've tried. First, wifi up, route command, then ping. Then wifi down. Ping. Then enable ethernet. Ping local computer and 8.8.8.8. Enable wifi. Ping.

root@Omega-B6CE:/mnt/sda# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default 192.168.0.1 0.0.0.0 UG 0 0 0 apcli0
192.168.0.0 * 255.255.255.0 U 0 0 0 apcli0
192.168.3.0 * 255.255.255.0 U 0 0 0 br-wlan
root@Omega-B6CE:/mnt/sda# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: seq=0 ttl=114 time=24.812 ms
64 bytes from 8.8.8.8: seq=1 ttl=114 time=28.690 ms
64 bytes from 8.8.8.8: seq=2 ttl=114 time=32.853 ms
64 bytes from 8.8.8.8: seq=3 ttl=114 time=42.783 ms
64 bytes from 8.8.8.8: seq=4 ttl=114 time=34.982 ms
64 bytes from 8.8.8.8: seq=5 ttl=114 time=108.420 ms
64 bytes from 8.8.8.8: seq=6 ttl=114 time=25.614 ms
64 bytes from 8.8.8.8: seq=7 ttl=114 time=45.043 ms
^C
--- 8.8.8.8 ping statistics ---
8 packets transmitted, 8 packets received, 0% packet loss
round-trip min/avg/max = 24.812/42.899/108.420 ms
root@Omega-B6CE:/mnt/sda# wifi down
root@Omega-B6CE:/mnt/sda# [ 745.521570] br-wlan: port 1(ra0) entered disabled state
[ 746.227420] device ra0 left promiscuous mode
[ 746.231888] br-wlan: port 1(ra0) entered disabled state

root@Omega-B6CE:/mnt/sda#
root@Omega-B6CE:/mnt/sda# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
ping: sendto: Network unreachable
root@Omega-B6CE:/mnt/sda# ping 192.168.0.112
PING 192.168.0.112 (192.168.0.112): 56 data bytes
ping: sendto: Network unreachable
root@Omega-B6CE:/mnt/sda# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
root@Omega-B6CE:/mnt/sda# onion ethernet client
root@Omega-B6CE:/mnt/sda# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
root@Omega-B6CE:/mnt/sda# [ 800.798364]
[ 800.798364] _ _____ ___ ___ _________ ___ ____
[ 800.798364] | | /| / / _ | / _ / _ \ / / __ / _ / / V1.1
[ 800.798364] | |/ |/ / __ |/ , _/ / / // // / , _/ _/
[ 800.798364] |/|// |//|// _/_//|//
[ 800.798364] Onion Enhanced MT7688 WiFi Driver
[ 800.798364]
[ 800.944957] DMA Scheduler Mode=0(LMAC)
[ 800.948788] efuse_probe: efuse = 10000012
[ 800.952907] 1. Phy Mode = 14
[ 801.125542] 2. Phy Mode = 14
[ 801.128517] 3. Phy Mode = 14
[ 801.131751] WTBL Segment 1 info:
[ 801.135166] MemBaseAddr/FID:0x28000/0
[ 801.139054] EntrySize/Cnt:32/128
[ 801.142500] WTBL Segment 2 info:
[ 801.145875] MemBaseAddr/FID:0x40000/0
[ 801.149761] EntrySize/Cnt:64/128
[ 801.153205] WTBL Segment 3 info:
[ 801.156578] MemBaseAddr/FID:0x42000/64
[ 801.160552] EntrySize/Cnt:64/128
[ 801.163996] WTBL Segment 4 info:
[ 801.167371] MemBaseAddr/FID:0x44000/128
[ 801.171431] EntrySize/Cnt:32/128
[ 803.273515] IPv6: ADDRCONF(NETDEV_UP): br-wlan: link is not ready
[ 804.085111] IPv6: ADDRCONF(NETDEV_UP): ra0: link is not ready
[ 804.320713] IPv6: ADDRCONF(NETDEV_CHANGE): ra0: link becomes ready
[ 807.568164] br-wlan: port 1(ra0) entered blocking state
[ 807.573479] br-wlan: port 1(ra0) entered disabled state
[ 807.579207] device ra0 entered promiscuous mode
[ 807.584127] br-wlan: port 1(ra0) entered blocking state
[ 807.589487] br-wlan: port 1(ra0) entered forwarding state
[ 807.597284] IPv6: ADDRCONF(NETDEV_CHANGE): br-wlan: link becomes ready
[ 809.784820] Interface apcli0 link up! (WPA2PSK AES)
root@Omega-B6CE:/mnt/sda# ping 192.168.0.112
PING 192.168.0.112 (192.168.0.112): 56 data bytes
64 bytes from 192.168.0.112: seq=0 ttl=128 time=26.188 ms
64 bytes from 192.168.0.112: seq=1 ttl=128 time=2.287 ms
64 bytes from 192.168.0.112: seq=2 ttl=128 time=2.669 ms
64 bytes from 192.168.0.112: seq=3 ttl=128 time=5.187 ms
64 bytes from 192.168.0.112: seq=4 ttl=128 time=4.743 ms
64 bytes from 192.168.0.112: seq=5 ttl=128 time=2.206 ms
^C
--- 192.168.0.112 ping statistics ---
6 packets transmitted, 6 packets received, 0% packet loss
round-trip min/avg/max = 2.206/7.213/26.188 ms
root@Omega-B6CE:/mnt/sda# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: seq=0 ttl=114 time=25.164 ms
64 bytes from 8.8.8.8: seq=1 ttl=114 time=28.169 ms
64 bytes from 8.8.8.8: seq=2 ttl=114 time=26.247 ms
^C
--- 8.8.8.8 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 25.164/26.526/28.169 ms
root@Omega-B6CE:/mnt/sda# ^C
root@Omega-B6CE:/mnt/sda# wifi down
root@Omega-B6CE:/mnt/sda# [ 833.479370] br-wlan: port 1(ra0) entered disabled state
[ 834.187453] device ra0 left promiscuous mode
[ 834.191923] br-wlan: port 1(ra0) entered disabled state
route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
root@Omega-B6CE:/mnt/sda# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
ping: sendto: Network unreachable
root@Omega-B6CE:/mnt/sda# wifi up
[ 847.226716] IPv6: ADDRCONF(NETDEV_UP): br-wlan: link is not ready
root@Omega-B6CE:/mnt/sda# [ 847.738909]
[ 847.738909] _ _____ ___ ___ _________ ___ ____
[ 847.738909] | | /| / / _ | / _ / _ \ / / __ / _ / / V1.1
[ 847.738909] | |/ |/ / __ |/ , _/ / / // // / , _/ _/
[ 847.738909] |/|// |//|// _/_//|/__/
[ 847.738909] Onion Enhanced MT7688 WiFi Driver
[ 847.738909]
[ 847.866471] DMA Scheduler Mode=0(LMAC)
[ 847.870301] efuse_probe: efuse = 10000012
[ 847.874422] 1. Phy Mode = 14
[ 848.041468] 2. Phy Mode = 14
[ 848.044444] 3. Phy Mode = 14
[ 848.047979] WTBL Segment 1 info:
[ 848.051349] MemBaseAddr/FID:0x28000/0
[ 848.055280] EntrySize/Cnt:32/128
[ 848.058726] WTBL Segment 2 info:
[ 848.062085] MemBaseAddr/FID:0x40000/0
[ 848.065982] EntrySize/Cnt:64/128
[ 848.069427] WTBL Segment 3 info:
[ 848.072785] MemBaseAddr/FID:0x42000/64
[ 848.076771] EntrySize/Cnt:64/128
[ 848.080223] WTBL Segment 4 info:
[ 848.083581] MemBaseAddr/FID:0x44000/128
[ 848.087655] EntrySize/Cnt:32/128
root@Omega-B6CE:/mnt/sda# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
ping: sendto: Network unreachable
[ 858.190074] IPv6: ADDRCONF(NETDEV_UP): ra0: link is not ready
[ 858.196047] IPv6: ADDRCONF(NETDEV_CHANGE): ra0: link becomes ready
root@Omega-B6CE:/mnt/sda# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
ping: sendto: Network unreachable
[ 860.818242] br-wlan: port 1(ra0) entered blocking state
[ 860.823557] br-wlan: port 1(ra0) entered disabled state
[ 860.829286] device ra0 entered promiscuous mode
[ 860.834051] br-wlan: port 1(ra0) entered blocking state
[ 860.839408] br-wlan: port 1(ra0) entered forwarding state
root@Omega-B6CE:[ 860.846322] IPv6: ADDRCONF(NETDEV_CHANGE): br-wlan: link becomes ready
root@Omega-B6CE:/mnt/sda# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
ping: sendto: Network unreachable
root@Omega-B6CE:/mnt/sda# [ 864.100109] Interface apcli0 link up! (WPA2PSK AES)
root@Omega-B6CE:/mnt/sda# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: seq=0 ttl=114 time=83.330 ms
64 bytes from 8.8.8.8: seq=1 ttl=114 time=45.875 ms
64 bytes from 8.8.8.8: seq=2 ttl=114 time=35.994 ms
64 bytes from 8.8.8.8: seq=3 ttl=114 time=32.406 ms
^C
--- 8.8.8.8 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 32.406/49.401/83.330 ms
root@Omega-B6CE:/mnt/sda# ping 192.168.0.112
PING 192.168.0.112 (192.168.0.112): 56 data bytes
64 bytes from 192.168.0.112: seq=0 ttl=128 time=5.111 ms
64 bytes from 192.168.0.112: seq=1 ttl=128 time=20.117 ms
64 bytes from 192.168.0.112: seq=2 ttl=128 time=77.893 ms
64 bytes from 192.168.0.112: seq=3 ttl=128 time=13.413 ms
^C
--- 192.168.0.112 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 5.111/29.133/77.893 ms
root@Omega-B6CE:/mnt/sda# ^C

Brand new Onion. Did update.

I can get wifi to work no problem. Ethernet not so much. I can ping local addresses but not things like google.com. If I never enable wifi, ethernet works. Once wifi is ever enabled, ethernet will not function.

What am I missing?

@crispyoz Also, for now we're not running scripts on boot. When we did, we didn't use the @reboot prefix. No clue what rc.local is nor procd.
We are indeed now running the script with the & a the end and that works. The other thing we had done was to disable the console port because our hardware was using that serial port to talk to a configuration program on a PC. This made debugging this quite difficult. So we have cut and jumpered the heck out of the board to move our test port to Uart2 and leave console alone.

@crispyoz After more investigation and thought, it may not be reflashing itself. When I first started with it, I did an upgrade and update, which took some time. Those are now part of our "install" script. So, when it loses its mind, and I run the install script, those things now say nothing to do, you're already up to date. Once you do upgrade and update, do they now become the "factory" image? I wouldn't think so, but maybe. If they don't then it's not reflashing itself I think, but instead is only wiping the file system. Does any of that make sense?

@crispyoz Thanks for the help. Freshly installed system ready to run (but not auto run - we've put a hold on that for the moment).

root@Omega-BE66:/mnt/sda1# oupgrade -v

Device Firmware Version: 0.3.3 b253
root@Omega-BE66:/mnt/sda1# mount
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/mtdblock6 on /overlay type jffs2 (rw,noatime)
overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600,ptmxmode=000)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
mountd(pid1100) on /tmp/run/blockd type autofs (rw,relatime,fd=7,pgrp=1,timeout=30,minproto=5,maxproto=5,indirect)
/dev/mtdblock7 on /mnt/mtdblock7 type jffs2 (rw,relatime)
/dev/sda1 on /mnt/sda1 type vfat (rw,relatime,fmask=0000,dmask=0000,allow_utime=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
root@Omega-BE66:/mnt/sda1# crontab -l
crontab: can't open 'root': No such file or directory
root@Omega-BE66:/mnt/sda1# cat /etc/rc.local

Put your custom commands here that should be executed once

the system init finished. By default this file does nothing.

exit 0
root@Omega-BE66:/mnt/sda1# ls -la /etc/init.d
drwxr-xr-x 2 root root 468 Feb 8 2022 .
drwxr-xr-x 1 root root 0 Nov 28 21:14 ..
-rwxr-xr-x 1 root root 267 Feb 8 2022 avahi-daemon
-rwxr-xr-x 1 root root 288 Feb 8 2022 blockd
-rwxr-xr-x 1 root root 1122 Feb 8 2022 boot
-rwxr-xr-x 1 root root 157 Feb 8 2022 bootcount
-rwxr-xr-x 1 root root 821 Feb 8 2022 cron
-rwxr-xr-x 1 root root 28796 Feb 8 2022 dnsmasq
-rwxr-xr-x 1 root root 255 Feb 8 2022 done
-rwxr-xr-x 1 root root 4909 Feb 8 2022 dropbear
-rwxr-xr-x 1 root root 658 Feb 8 2022 ethernet-mode
-rwxr-xr-x 1 root root 997 Feb 8 2022 firewall
-rwxr-xr-x 1 root root 215 Feb 8 2022 fstab
-rwxr-xr-x 1 root root 1013 Feb 8 2022 gpio_switch
-rwxr-xr-x 1 root root 3364 Feb 8 2022 led
-rwxr-xr-x 1 root root 2479 Feb 8 2022 log
-rwxr-xr-x 1 root root 7475 Feb 8 2022 mosquitto
-rwxr-xr-x 1 root root 2663 Feb 8 2022 network
-rwxr-xr-x 1 root root 292 Feb 8 2022 odhcpd
-rwxr-xr-x 1 root root 276 Feb 8 2022 onion-helper
-rwxr-xr-x 1 root root 95 Feb 8 2022 oupgrade
-rwxr-xr-x 1 root root 249 Feb 8 2022 rpcd
-rwxr-xr-x 1 root root 484 Feb 8 2022 shellinabox
-rwxr-xr-x 1 root root 1212 Feb 8 2022 sysctl
-rwxr-xr-x 1 root root 662 Feb 8 2022 sysfixtime
-rwxr-xr-x 1 root root 2155 Feb 8 2022 sysntpd
-rwxr-xr-x 1 root root 1047 Feb 8 2022 system
-rwxr-xr-x 1 root root 4817 Feb 8 2022 uhttpd
-rwxr-xr-x 1 root root 106 Feb 8 2022 umount
-rwxr-xr-x 1 root root 85 Feb 8 2022 updateHostname
-rwxr-xr-x 1 root root 239 Feb 8 2022 urandom_seed
root@Omega-BE66:/mnt/sda1#

@crispyoz Thanks for the reply. The script is actually quite complex. It is a number of python files and threads that automate the cleaning of a beer line in a Pub. So, there are some buttons, some LEDs, a couple of pumps, valves, and the like. Press a button and we start a clean cycle with many many steps. Like I said quite complicated actually for what it is. We've got this running on over 200 RPis in actual pubs for over 4 years and no issues, but I don't think the Pi has the capability to reflash itself. But other than issues caused by leaking cleaning fluid (pH of 12 oh my) no real operational issues. So, we think the scripts are solid.
Could be a thing we are not aware of on the Onion vs RPi - like if we write a configuration file to the file system, on the Pi it goes to the USB drive (from which we boot and run everything). Where does it go on the Onion? Program FLASH?

Hey All - I seem to have the exact opposite problem from everyone else. Seems like most people can't get their unit to FLASH. Mine won't stop. I have a set of python scripts that have been proven over several years on over 200 commercial units to be good - normal system is RPi. Since I can't get Pi's anymore, we are trying to switch to Onion. Everything is working fine except two things:

1. Unable to get the scripts to run from Cron at boot without losing the console
2. After 24-48 hours of running the code, the system goes away. When I finally reconnect, I'm greeted with the first time setup screens. All my files are gone and I have to do a complete setup all over again.

This has happened about 10 times so far and is both frustrating and un-nerving. What info would y'all need to provide some assistance?

Thanks in advance.