After connection to wifi to one particular router, Omega turns off.
I know settings are proper, because when they are not (for example, another type of encryption), connection is basically not established, but device is still working.
I did my best to see, if all is on the place.
I tried with another router. Connection worked immediately, just by wifisetup. Used oupgrade then, but it that didn't made any change.
I changed the IP twice to avoid conflicts- once to 192.168.9.1, and to 192.168.9.24 as in the provided example, but no effect. I'm in large office network, and nmap reported, that there are 192.168.9.* ip's, so I changed that once more to 192.168.24.1. As you understand, nothing.
Here I'm providing my file /etc/config/wireless:
config wifi-device 'ra0'
option type 'ralink'
option mode '9'
option channel 'auto'
option txpower '100'
option ht '40'
option country 'PL'
option disabled '0'
option device 'ra0'
option network 'wlan'
option mode 'ap'
option encryption 'AES'
option key '12345678'
option ApCliEncrypType 'AES'
option ssid 'Omega-4117'
option ApCliSsid 'Ricoh Moto'
option ApCliPassWord 'asdfasdfasdasdfasdf'
option ApCliAuthMode 'WPA2PSK'
option ApCliEnable '1'
This is the configuration, which is turning off my device.
Problem appears with industrial Motorola router.
Thank you for any help, because I'm clueless now.