Seems to be a corrupt download.
Downloaded WRAPCore again, copied it on a USB stick and renamed it "Omage2.bin"
holding the reset button while rebooting, choose "2Load from USB"
and after some minutes the problem was solved
Posts made by MOnion G
RE: [Solved] Omega2p Warp upgrade fails ?
[Solved] Omega2p Warp upgrade fails ?
An upgrade with
fails with the error msg :
"> ERROR: Could not connect to Onion Firmware Server! Check your internet connection and try again!"
The internet connection is working and "ping repo.onion.io
PING repo.onion.io (184.108.40.206): 56 data bytes
64 bytes from 220.127.116.11: seq=0 ttl=44 time=104.056 ms" works as shown!
downloads the file, but
stops and reboot after:
' Saving config files...
killall: watchdog: no process killed
Sending TERM to remaining processes ... onion-helper udhcpc udhcpc'
And deletes the downloaded firmware file.