I just received a few weeks ago my new Omega2S+ - LTE.
So far it works well: no problem to launch, to connect to it, to update the OS, etc.
I use a french LTE network, and I am able to provide internet to a computer thrue an Onion Ethernet module (so without wifi). I am really satisfied.
But until today, I have been unable to use the GNSS / GPS positionning.
I've used this guide: https://onion.io/omega2-lte-guide/ ; and followed some explanations here : https://docs.onion.io/omega2-docs/using-gps-expansion.html#using-gps-expansion
I read somewhere I had to use the following command at each boot :
o2lte gnss enable
that gave me:
Enabling GNSS data collection
Then I called
ubus call gps info
that always gave me:
I tested different antennas in open fields, so it does not come from elsewhere than the Omega2S+.
So I decided to simply read raw NMEA strings. I am familiar to execute cat /dev/... commands. But first, following the guide, I had to disable the ogps daemon:
Each command sent the same answer:
-ash: etc/init.d/gps: not found
And indeed, I searched and did not find any gps initialization file in /etc/init.d folder...
Is it normal ?
Besides I tried to update opkg then install ogps, but it was already done:
opkg install ogps
And when I listed all the available ubus services, I do had gps listed:
And last but not least, by trying the following command (in order to re-update opkg and re-install ogps) ... :
opkg remove ogps
... I got :
No package removed
Collected errors :
print_dependents_warning: Package ogps is depended upon by packages:
print_dependents_warning: These might cease to work if package ogps is removed.
So I decided to stop my digging and to come here to seek help.
Any recommandation ?
Thanks in advance,