<![CDATA[Schematics for the Omeag2, pin function details ?]]>Re: Documentation is dead ?

There were a couple of posts earlier too on the missing documentation .... but, still no documentation seems to be available for the Omega2 and 2+ ( I mean Circuit schematics for the Omega2 and the various expansion docks and boards).

There is some documentation for the first version Omega, which is a little different from the 2 and 2+.

Why this delay in posting the schematics ?

Also, can anyone point me to any official documentation on some of the pin functions ? Like VOUT, FW-RST, RST etc. ?
How can I source 3.3VDC power from the VOUT pin ? How much current can I source ? What is the input requirement ?
Is FW-RST internally pulled high or it needs a pull-up ?
Can the RST pin be left floating or it needs a valid reset input or just a pull up is ok ?

]]>http://community.onion.io/topic/1568/schematics-for-the-omeag2-pin-function-detailsRSS for NodeFri, 17 Apr 2026 03:38:49 GMTFri, 03 Feb 2017 06:09:24 GMT60<![CDATA[Reply to Schematics for the Omeag2, pin function details ? on Fri, 03 Feb 2017 06:09:24 GMT]]>Re: Documentation is dead ?

There were a couple of posts earlier too on the missing documentation .... but, still no documentation seems to be available for the Omega2 and 2+ ( I mean Circuit schematics for the Omega2 and the various expansion docks and boards).

There is some documentation for the first version Omega, which is a little different from the 2 and 2+.

Why this delay in posting the schematics ?

Also, can anyone point me to any official documentation on some of the pin functions ? Like VOUT, FW-RST, RST etc. ?
How can I source 3.3VDC power from the VOUT pin ? How much current can I source ? What is the input requirement ?
Is FW-RST internally pulled high or it needs a pull-up ?
Can the RST pin be left floating or it needs a valid reset input or just a pull up is ok ?

]]>http://community.onion.io/post/10205http://community.onion.io/post/10205Fri, 03 Feb 2017 06:09:24 GMT<![CDATA[Reply to Schematics for the Omeag2, pin function details ? on Fri, 03 Feb 2017 06:41:18 GMT]]>@Shashi-Alabur said in Schematics for the Omeag2, pin function details ?:

Is FW-RST internally pulled high or it needs a pull-up ?
Can the RST pin be left floating or it needs a valid reset input or just a pull up is ok ?

FW-RST is pulled low, not high. RST-pin can be left floating.

]]>http://community.onion.io/post/10206http://community.onion.io/post/10206Fri, 03 Feb 2017 06:41:18 GMT<![CDATA[Reply to Schematics for the Omeag2, pin function details ? on Fri, 03 Feb 2017 06:50:28 GMT]]>https://community.onion.io/topic/1524/would-someone-clarify-the-exact-function-of-these-omega2-pins/

]]>http://community.onion.io/post/10210http://community.onion.io/post/10210Fri, 03 Feb 2017 06:50:28 GMT