We have upgraded the community system as part of the upgrade a password reset is required for all users before login in.

LED not working



  • I'm testing my omega. I can connect to wifi, but the LED commands are not recognized.
    I use the serial port to send command line commands.
    root@Omega-16FB:/# expled 0xf21133
    /bin/ash: expled: not found



  • @Chris-Idema Seems that you might be using an older firmware version. You can use oupgrade -check to see if update is available for your device. If upgrade is available, you can upgrade to the newest version by doing oupgrade -force. Just make sure you wait for the Omega to reboot after the upgrade. It can take up to 10 minutes to complete the upgrade.

    Please let me know if this helps!



  • I had software version 0.0.1 I've upgraded to 0.0.4 b220. Now It works fine. Thanks!


Log in to reply
 

Looks like your connection to Community was lost, please wait while we try to reconnect.