<![CDATA[How use serial port0 on Omega 2 plus]]>Hi
I'm trying to use my ttys0 serial port but its not working. All I get when trying to send is random characters and it wont revive anything using the cat command.
I followed this guide https://www.hackster.io/sidwarkd/free-up-the-serial-port-on-the-onion-omega-7b3849 to free it from the boot messages but the same happens.
The second port works fine.
Any idea how I can fix this?
Thanks in advance.

]]>http://community.onion.io/topic/2182/how-use-serial-port0-on-omega-2-plusRSS for NodeSat, 06 Jun 2026 10:05:14 GMTMon, 03 Jul 2017 05:33:07 GMT60<![CDATA[Reply to How use serial port0 on Omega 2 plus on Mon, 03 Jul 2017 05:33:07 GMT]]>Hi
I'm trying to use my ttys0 serial port but its not working. All I get when trying to send is random characters and it wont revive anything using the cat command.
I followed this guide https://www.hackster.io/sidwarkd/free-up-the-serial-port-on-the-onion-omega-7b3849 to free it from the boot messages but the same happens.
The second port works fine.
Any idea how I can fix this?
Thanks in advance.

]]>http://community.onion.io/post/13640http://community.onion.io/post/13640Mon, 03 Jul 2017 05:33:07 GMT<![CDATA[Reply to How use serial port0 on Omega 2 plus on Mon, 03 Jul 2017 15:55:21 GMT]]>Before you turned off the Kernel Echo did you get boot messages on ttyS0?

What happens if you do this from your Omega

echo "test" >> /dev/ttyS0

Do you have any kind of logic analyzer or like this https://www.saleae.com/ that you can put on the Omega RX/TX lines?

]]>http://community.onion.io/post/13641http://community.onion.io/post/13641Mon, 03 Jul 2017 15:55:21 GMT