<![CDATA[Omega2 - LED goes solid for few seconds, then off completely]]>Hello,

I've used this breakout (https://www.tindie.com/products/MatthewWolfe/micro-usb-to-33v-breakout/) to connect my Omega2 to USB for power, but sadly LED goes solid on for few seconds just to go completely off seconds later. Unit gets a little warm over time, but nothing pop ups in my WiFi networks. I've used this guide (https://docs.onion.io/omega2-docs/hardware-prep-no-dock.html) to connect to right pins.

]]>http://community.onion.io/topic/2222/omega2-led-goes-solid-for-few-seconds-then-off-completelyRSS for NodeTue, 06 Oct 2026 15:49:38 GMTWed, 19 Jul 2017 11:58:16 GMT60<![CDATA[Reply to Omega2 - LED goes solid for few seconds, then off completely on Wed, 19 Jul 2017 11:58:16 GMT]]>Hello,

I've used this breakout (https://www.tindie.com/products/MatthewWolfe/micro-usb-to-33v-breakout/) to connect my Omega2 to USB for power, but sadly LED goes solid on for few seconds just to go completely off seconds later. Unit gets a little warm over time, but nothing pop ups in my WiFi networks. I've used this guide (https://docs.onion.io/omega2-docs/hardware-prep-no-dock.html) to connect to right pins.

]]>http://community.onion.io/post/13805http://community.onion.io/post/13805Wed, 19 Jul 2017 11:58:16 GMT<![CDATA[Reply to Omega2 - LED goes solid for few seconds, then off completely on Thu, 20 Jul 2017 03:25:49 GMT]]>@Piotr-Swat 250mA is not enough current for the omega2. having 1 Amp minimum for a good boot is probably the best thing.

]]>http://community.onion.io/post/13814http://community.onion.io/post/13814Thu, 20 Jul 2017 03:25:49 GMT