<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[[resolved] bad CRC boot loop (again)]]></title><description><![CDATA[<p dir="auto">Got two more Omega2Pro boards yesterday, both refuse to initialise and are stuck in a loop. I made an attempt to recover with a known working firmware (<strong>omega2pro-v0.3.1-b211.bin</strong>) from USB but the result is the same. It gets to the point when the WiFi driver is loaded. On my one working board it looks like this:</p>
<pre><code>...
[   30.063996] DMA Scheduler Mode=0(LMAC)
[   30.067827] efuse_probe: efuse = 10000012
[   30.071990] 1. Phy Mode = 14
[   30.275091] 2. Phy Mode = 14
[   30.278070] 3. Phy Mode = 14
...
</code></pre>
<p dir="auto">The two new boards only show this:</p>
<pre><code>...
[   33.426104] DMA Scheduler Mode=0(LMAC)
[   33.429936] efuse_probe: efuse = 10000012
[   33.434141] 1. Phy Mode = 14
...
</code></pre>
<p dir="auto">and then reboot on their own.</p>
<p dir="auto">Any help would be appreciated. Thanks!</p>
<p dir="auto">--<br />
part of boot log</p>
<pre><code>[   11.891319] block: attempting to load /etc/config/fstab
[   11.902161] block: unable to load configuration (fstab: Entry not found)
[   11.909040] block: no usable configuration
[   11.914186] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[   11.990535] urandom-seed: Seed file not found (/etc/urandom.seed)
[   12.202673] procd: - early -
[   12.205712] procd: - watchdog -
[   12.879891] procd: - watchdog -
[   12.883434] procd: - ubus -
[   12.982202] random: ubusd: uninitialized urandom read (4 bytes read)
[   13.183456] random: ubusd: uninitialized urandom read (4 bytes read)
[   13.190500] random: ubusd: uninitialized urandom read (4 bytes read)
[   13.197954] procd: - init -
Please press Enter to activate this console.
[   13.754276] kmodloader: loading kernel modules from /etc/modules.d/*
[   13.923503] RPC: Registered named UNIX socket transport module.
[   13.929516] RPC: Registered udp transport module.
[   13.934354] RPC: Registered tcp transport module.
[   13.939122] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   13.957342] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[   14.048594] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.710931] 
[   14.710931] 
[   14.710931] === pAd = c062b000, size = 1178064 ===
[   14.710931] 
[   14.722242] mt7628_init(FW(8a00), HW(8a01), CHIPID(7628))
[   14.771773] Linux video capture interface: v2.00
[   14.789366] hidraw: raw HID events driver (C) Jiri Kosina
[   14.818807] ledchain: pwm_base=0xB0005000
[   14.823128] ledchain: Device: /dev/ledchain2
[   14.827459] ledchain: - PWM channel    : 2
[   14.831648] ledchain: - PWM buffer size: 12
[   14.835885] ledchain: - Number of LEDs : 1
[   14.840043] ledchain: - Inverted       : 0
[   14.844191] ledchain: - LED type       : WS2812
[   14.848780] ledchain: - Max retries    : 3
[   14.884334] Bluetooth: Core ver 2.22
[   14.888065] NET: Registered protocol family 31
[   14.892623] Bluetooth: HCI device and connection manager initialized
[   14.899078] Bluetooth: HCI socket layer initialized
[   14.904040] Bluetooth: L2CAP socket layer initialized
[   14.909197] Bluetooth: SCO socket layer initialized
[   14.917028] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.922497] Bluetooth: BNEP filters: protocol multicast
[   14.927807] Bluetooth: BNEP socket layer initialized
[   14.940493] usbcore: registered new interface driver btusb
[   14.950761] usbcore: registered new interface driver cdc_acm
[   14.956512] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   14.969075] Bluetooth: HCI UART driver ver 2.3
[   14.973674] Bluetooth: HCI UART protocol H4 registered
[   14.978884] Bluetooth: HCI UART protocol BCSP registered
[   14.988930] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   14.995030] Bluetooth: HIDP socket layer initialized
[   15.006037] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.033901] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
[   15.132632] rt2880-pinmux pinctrl: pin io18 already requested by pinctrl; cannot claim for 10005000.pwm
[   15.142248] rt2880-pinmux pinctrl: pin-18 (10005000.pwm) status -22
[   15.148610] rt2880-pinmux pinctrl: could not request pin 18 (io18) from group pwm0  on device rt2880-pinmux
[   15.158502] mtk-pwm 10005000.pwm: Error applying setting, reverse things back
[   15.172974] Bluetooth: RFCOMM TTY layer initialized
[   15.177951] Bluetooth: RFCOMM socket layer initialized
[   15.183254] Bluetooth: RFCOMM ver 1.11
[   15.204404] usbcore: registered new interface driver ums-alauda
[   15.213650] usbcore: registered new interface driver ums-cypress
[   15.223199] usbcore: registered new interface driver ums-datafab
[   15.232401] usbcore: registered new interface driver ums-freecom
[   15.241826] usbcore: registered new interface driver ums-isd200
[   15.251397] usbcore: registered new interface driver ums-jumpshot
[   15.260767] usbcore: registered new interface driver ums-karma
[   15.270933] usbcore: registered new interface driver ums-sddr09
[   15.280362] usbcore: registered new interface driver ums-sddr55
[   15.290235] usbcore: registered new interface driver ums-usbat
[   15.303533] usbcore: registered new interface driver usbhid
[   15.309193] usbhid: USB HID core driver
[   15.317590] usbcore: registered new interface driver usblp
[   15.333230] usbcore: registered new interface driver usbserial
[   15.339241] usbcore: registered new interface driver usbserial_generic
[   15.346034] usbserial: USB Serial support registered for generic
[   15.365738] Driver for 1-wire Dallas network protocol.
[   15.395274] xt_time: kernel timezone is -0000
[   15.402356] usbcore: registered new interface driver ch341
[   15.408028] usbserial: USB Serial support registered for ch341-uart
[   15.417550] usbcore: registered new interface driver cp210x
[   15.423388] usbserial: USB Serial support registered for cp210x
[   15.433465] usbcore: registered new interface driver ftdi_sio
[   15.439402] usbserial: USB Serial support registered for FTDI USB Serial Device
[   15.461025] usbcore: registered new interface driver pl2303
[   15.466778] usbserial: USB Serial support registered for pl2303
[   15.478724] PPP generic driver version 2.4.2
[   15.486570] NET: Registered protocol family 24
[   15.506543] usbcore: registered new interface driver snd-usb-audio
[   15.530170] usbcore: registered new interface driver uvcvideo
[   15.536007] USB Video Class driver (1.1.1)
[   15.547229] usbcore: registered new interface driver option
[   15.553077] usbserial: USB Serial support registered for GSM modem (1-port)
[   15.565778] kmodloader: done loading kernel modules from /etc/modules.d/*
[   15.993003] urandom_read: 5 callbacks suppressed
[   15.993013] random: jshn: uninitialized urandom read (4 bytes read)
[   27.234585] EXT4-fs (mmcblk0p1): recovery complete
[   27.239473] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: 
[   32.192064] IPv6: ADDRCONF(NETDEV_UP): br-wlan: link is not ready
[   33.064132] 
[   33.064132] _      _____   ___  ___    _________  ___  ____
[   33.064132] | | /| / / _ | / _ \/ _ \  / ___/ __ \/ _ \/ __/ V1.0
[   33.064132] | |/ |/ / __ |/ , _/ ___/ / /__/ /_/ / , _/ _/  
[   33.064132] |__/|__/_/ |_/_/|_/_/     \___/\____/_/|_/___/  
[   33.064132] 		   Onion Enhanced MT7688 WiFi Driver 
[   33.064132] 
[   33.490146] DMA Scheduler Mode=0(LMAC)
[   33.493977] efuse_probe: efuse = 10000012
[   33.498098] 1. Phy Mode = 14
^@


   ____       _             ____
  / __ \___  (_)__  ___    / __ \__ _  ___ ___ ____ _
 / /_/ / _ \/ / _ \/ _ \  / /_/ /  ' \/ -_) _ `/ _ `/
 \____/_//_/_/\___/_//_/  \____/_/_/_/\__/\_, /\_,_/
 W H A T  W I L L  Y O U  I N V E N T ? /___/"

Board: Onion Omega2 APSoC DRAM:  128 MB
relocate_code Pointer at: 87f60000
flash manufacture id: ef, device id 40 19
find flash: W25Q256FV
*** Warning - bad CRC, using default environment

============================================ 
Onion Omega2 UBoot Version: 4.3.0.3
-------------------------------------------- 
ASIC 7628_MP (Port5&lt;-&gt;None)
DRAM component: 1024 Mbits DDR, width 16
DRAM bus: 16 bit
Total memory: 128 MBytes
Flash component: SPI Flash
Date:Feb 26 2019  Time:13:04:08
============================================ 
icache: sets:512, ways:4, linesz:32 ,total:65536
dcache: sets:256, ways:4, linesz:32 ,total:32768 
CPU freq = 575 MHZ
Estimated memory size = 128 Mbytes
Resetting MT7628 PHY.
Initializing MT7688 GPIO system.
wifi mac address = 40A36BC32307.


**************************************
* Hold Reset button for more options *
**************************************


Boot Linux from Flash NO RESET PRESSED.
## Booting image at bc050000 ...
   Image Name:   MIPS OpenWrt Linux-4.14.81
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1572303 Bytes =  1.5 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 128

Starting kernel ...

[    0.000000] Linux version 4.14.81 (jenkins@f2c5b085c3c5) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r0+7428-2af79b2e09)) #0 Fri Feb 1 01:17:10 2019
[    0.000000] Board has DDR2
[    0.000000] Analog PMU set to hw control
[    0.000000] Digital PMU set to hw control
[    0.000000] SoC Type: MediaTek MT7688 ver:1 eco:2
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
[    0.000000] MIPS: machine is Onion Omega2 Pro
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] random: get_random_bytes called from start_kernel+0x8c/0x474 with crng_init=0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=0003f810
[    0.000000] Readback ErrCtl register=0003f810
[    0.000000] Memory: 59740K/65536K available (3613K kernel code, 198K rwdata, 900K rodata, 208K init, 202K bss, 5796K reserved, 0K cma-reserved)
</code></pre>
]]></description><link>http://community.onion.io/topic/3602/resolved-bad-crc-boot-loop-again</link><generator>RSS for Node</generator><lastBuildDate>Sat, 16 May 2026 18:07:13 GMT</lastBuildDate><atom:link href="http://community.onion.io/topic/3602.rss" rel="self" type="application/rss+xml"/><pubDate>Wed, 15 May 2019 07:36:01 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to [resolved] bad CRC boot loop (again) on Wed, 15 May 2019 08:00:40 GMT]]></title><description><![CDATA[<p dir="auto">Got two more Omega2Pro boards yesterday, both refuse to initialise and are stuck in a loop. I made an attempt to recover with a known working firmware (<strong>omega2pro-v0.3.1-b211.bin</strong>) from USB but the result is the same. It gets to the point when the WiFi driver is loaded. On my one working board it looks like this:</p>
<pre><code>...
[   30.063996] DMA Scheduler Mode=0(LMAC)
[   30.067827] efuse_probe: efuse = 10000012
[   30.071990] 1. Phy Mode = 14
[   30.275091] 2. Phy Mode = 14
[   30.278070] 3. Phy Mode = 14
...
</code></pre>
<p dir="auto">The two new boards only show this:</p>
<pre><code>...
[   33.426104] DMA Scheduler Mode=0(LMAC)
[   33.429936] efuse_probe: efuse = 10000012
[   33.434141] 1. Phy Mode = 14
...
</code></pre>
<p dir="auto">and then reboot on their own.</p>
<p dir="auto">Any help would be appreciated. Thanks!</p>
<p dir="auto">--<br />
part of boot log</p>
<pre><code>[   11.891319] block: attempting to load /etc/config/fstab
[   11.902161] block: unable to load configuration (fstab: Entry not found)
[   11.909040] block: no usable configuration
[   11.914186] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[   11.990535] urandom-seed: Seed file not found (/etc/urandom.seed)
[   12.202673] procd: - early -
[   12.205712] procd: - watchdog -
[   12.879891] procd: - watchdog -
[   12.883434] procd: - ubus -
[   12.982202] random: ubusd: uninitialized urandom read (4 bytes read)
[   13.183456] random: ubusd: uninitialized urandom read (4 bytes read)
[   13.190500] random: ubusd: uninitialized urandom read (4 bytes read)
[   13.197954] procd: - init -
Please press Enter to activate this console.
[   13.754276] kmodloader: loading kernel modules from /etc/modules.d/*
[   13.923503] RPC: Registered named UNIX socket transport module.
[   13.929516] RPC: Registered udp transport module.
[   13.934354] RPC: Registered tcp transport module.
[   13.939122] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   13.957342] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[   14.048594] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.710931] 
[   14.710931] 
[   14.710931] === pAd = c062b000, size = 1178064 ===
[   14.710931] 
[   14.722242] mt7628_init(FW(8a00), HW(8a01), CHIPID(7628))
[   14.771773] Linux video capture interface: v2.00
[   14.789366] hidraw: raw HID events driver (C) Jiri Kosina
[   14.818807] ledchain: pwm_base=0xB0005000
[   14.823128] ledchain: Device: /dev/ledchain2
[   14.827459] ledchain: - PWM channel    : 2
[   14.831648] ledchain: - PWM buffer size: 12
[   14.835885] ledchain: - Number of LEDs : 1
[   14.840043] ledchain: - Inverted       : 0
[   14.844191] ledchain: - LED type       : WS2812
[   14.848780] ledchain: - Max retries    : 3
[   14.884334] Bluetooth: Core ver 2.22
[   14.888065] NET: Registered protocol family 31
[   14.892623] Bluetooth: HCI device and connection manager initialized
[   14.899078] Bluetooth: HCI socket layer initialized
[   14.904040] Bluetooth: L2CAP socket layer initialized
[   14.909197] Bluetooth: SCO socket layer initialized
[   14.917028] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.922497] Bluetooth: BNEP filters: protocol multicast
[   14.927807] Bluetooth: BNEP socket layer initialized
[   14.940493] usbcore: registered new interface driver btusb
[   14.950761] usbcore: registered new interface driver cdc_acm
[   14.956512] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   14.969075] Bluetooth: HCI UART driver ver 2.3
[   14.973674] Bluetooth: HCI UART protocol H4 registered
[   14.978884] Bluetooth: HCI UART protocol BCSP registered
[   14.988930] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   14.995030] Bluetooth: HIDP socket layer initialized
[   15.006037] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.033901] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
[   15.132632] rt2880-pinmux pinctrl: pin io18 already requested by pinctrl; cannot claim for 10005000.pwm
[   15.142248] rt2880-pinmux pinctrl: pin-18 (10005000.pwm) status -22
[   15.148610] rt2880-pinmux pinctrl: could not request pin 18 (io18) from group pwm0  on device rt2880-pinmux
[   15.158502] mtk-pwm 10005000.pwm: Error applying setting, reverse things back
[   15.172974] Bluetooth: RFCOMM TTY layer initialized
[   15.177951] Bluetooth: RFCOMM socket layer initialized
[   15.183254] Bluetooth: RFCOMM ver 1.11
[   15.204404] usbcore: registered new interface driver ums-alauda
[   15.213650] usbcore: registered new interface driver ums-cypress
[   15.223199] usbcore: registered new interface driver ums-datafab
[   15.232401] usbcore: registered new interface driver ums-freecom
[   15.241826] usbcore: registered new interface driver ums-isd200
[   15.251397] usbcore: registered new interface driver ums-jumpshot
[   15.260767] usbcore: registered new interface driver ums-karma
[   15.270933] usbcore: registered new interface driver ums-sddr09
[   15.280362] usbcore: registered new interface driver ums-sddr55
[   15.290235] usbcore: registered new interface driver ums-usbat
[   15.303533] usbcore: registered new interface driver usbhid
[   15.309193] usbhid: USB HID core driver
[   15.317590] usbcore: registered new interface driver usblp
[   15.333230] usbcore: registered new interface driver usbserial
[   15.339241] usbcore: registered new interface driver usbserial_generic
[   15.346034] usbserial: USB Serial support registered for generic
[   15.365738] Driver for 1-wire Dallas network protocol.
[   15.395274] xt_time: kernel timezone is -0000
[   15.402356] usbcore: registered new interface driver ch341
[   15.408028] usbserial: USB Serial support registered for ch341-uart
[   15.417550] usbcore: registered new interface driver cp210x
[   15.423388] usbserial: USB Serial support registered for cp210x
[   15.433465] usbcore: registered new interface driver ftdi_sio
[   15.439402] usbserial: USB Serial support registered for FTDI USB Serial Device
[   15.461025] usbcore: registered new interface driver pl2303
[   15.466778] usbserial: USB Serial support registered for pl2303
[   15.478724] PPP generic driver version 2.4.2
[   15.486570] NET: Registered protocol family 24
[   15.506543] usbcore: registered new interface driver snd-usb-audio
[   15.530170] usbcore: registered new interface driver uvcvideo
[   15.536007] USB Video Class driver (1.1.1)
[   15.547229] usbcore: registered new interface driver option
[   15.553077] usbserial: USB Serial support registered for GSM modem (1-port)
[   15.565778] kmodloader: done loading kernel modules from /etc/modules.d/*
[   15.993003] urandom_read: 5 callbacks suppressed
[   15.993013] random: jshn: uninitialized urandom read (4 bytes read)
[   27.234585] EXT4-fs (mmcblk0p1): recovery complete
[   27.239473] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: 
[   32.192064] IPv6: ADDRCONF(NETDEV_UP): br-wlan: link is not ready
[   33.064132] 
[   33.064132] _      _____   ___  ___    _________  ___  ____
[   33.064132] | | /| / / _ | / _ \/ _ \  / ___/ __ \/ _ \/ __/ V1.0
[   33.064132] | |/ |/ / __ |/ , _/ ___/ / /__/ /_/ / , _/ _/  
[   33.064132] |__/|__/_/ |_/_/|_/_/     \___/\____/_/|_/___/  
[   33.064132] 		   Onion Enhanced MT7688 WiFi Driver 
[   33.064132] 
[   33.490146] DMA Scheduler Mode=0(LMAC)
[   33.493977] efuse_probe: efuse = 10000012
[   33.498098] 1. Phy Mode = 14
^@


   ____       _             ____
  / __ \___  (_)__  ___    / __ \__ _  ___ ___ ____ _
 / /_/ / _ \/ / _ \/ _ \  / /_/ /  ' \/ -_) _ `/ _ `/
 \____/_//_/_/\___/_//_/  \____/_/_/_/\__/\_, /\_,_/
 W H A T  W I L L  Y O U  I N V E N T ? /___/"

Board: Onion Omega2 APSoC DRAM:  128 MB
relocate_code Pointer at: 87f60000
flash manufacture id: ef, device id 40 19
find flash: W25Q256FV
*** Warning - bad CRC, using default environment

============================================ 
Onion Omega2 UBoot Version: 4.3.0.3
-------------------------------------------- 
ASIC 7628_MP (Port5&lt;-&gt;None)
DRAM component: 1024 Mbits DDR, width 16
DRAM bus: 16 bit
Total memory: 128 MBytes
Flash component: SPI Flash
Date:Feb 26 2019  Time:13:04:08
============================================ 
icache: sets:512, ways:4, linesz:32 ,total:65536
dcache: sets:256, ways:4, linesz:32 ,total:32768 
CPU freq = 575 MHZ
Estimated memory size = 128 Mbytes
Resetting MT7628 PHY.
Initializing MT7688 GPIO system.
wifi mac address = 40A36BC32307.


**************************************
* Hold Reset button for more options *
**************************************


Boot Linux from Flash NO RESET PRESSED.
## Booting image at bc050000 ...
   Image Name:   MIPS OpenWrt Linux-4.14.81
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1572303 Bytes =  1.5 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 128

Starting kernel ...

[    0.000000] Linux version 4.14.81 (jenkins@f2c5b085c3c5) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r0+7428-2af79b2e09)) #0 Fri Feb 1 01:17:10 2019
[    0.000000] Board has DDR2
[    0.000000] Analog PMU set to hw control
[    0.000000] Digital PMU set to hw control
[    0.000000] SoC Type: MediaTek MT7688 ver:1 eco:2
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
[    0.000000] MIPS: machine is Onion Omega2 Pro
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] random: get_random_bytes called from start_kernel+0x8c/0x474 with crng_init=0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=0003f810
[    0.000000] Readback ErrCtl register=0003f810
[    0.000000] Memory: 59740K/65536K available (3613K kernel code, 198K rwdata, 900K rodata, 208K init, 202K bss, 5796K reserved, 0K cma-reserved)
</code></pre>
]]></description><link>http://community.onion.io/post/19495</link><guid isPermaLink="true">http://community.onion.io/post/19495</guid><dc:creator><![CDATA[Marko Lukat]]></dc:creator><pubDate>Wed, 15 May 2019 08:00:40 GMT</pubDate></item><item><title><![CDATA[Reply to [resolved] bad CRC boot loop (again) on Wed, 15 May 2019 08:00:03 GMT]]></title><description><![CDATA[<p dir="auto">We live and learn. Turns out I didn't provide enough power to the board. Everything's OK now.</p>
]]></description><link>http://community.onion.io/post/19496</link><guid isPermaLink="true">http://community.onion.io/post/19496</guid><dc:creator><![CDATA[Marko Lukat]]></dc:creator><pubDate>Wed, 15 May 2019 08:00:03 GMT</pubDate></item></channel></rss>