We have upgraded the community system as part of the upgrade a password reset is required for all users before login in.

mmc0 stuck in programming state



  • Hello,

    I have developed a datalogger based on Onion Omega2s+ and sometimes I experienced some problems with the microSD card. Checkig the kernel messaged through dmesg, I found the following output:

    [60096.313467] msdc-1 -> XXX CMD<25> wait xfer_done<4096> timeout!! <- msdc_do_request() : L<1620> PID<mmcqd/0><0x16a>
    [60096.313501] msdc-1 -> DMA_SA = 0x626000 <- msdc_do_request() : L<1621> PID<mmcqd/0><0x16a>
    [60096.313519] msdc-1 -> DMA_CA = 0x626000 <- msdc_do_request() : L<1622> PID<mmcqd/0><0x16a>
    [60096.313537] msdc-1 -> DMA_CTRL = 0x6400 <- msdc_do_request() : L<1623> PID<mmcqd/0><0x16a>
    [60096.313556] msdc-1 -> DMA_CFG = 0x3 <- msdc_do_request() : L<1624> PID<mmcqd/0><0x16a>
    [60696.323472] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect
    [60696.433433] msdc-1 -> XXX sdc_busy timeout: before CMD<55> <- msdc_command_start() : L<1036> PID<mmcqd/0><0x16a>
    [60696.498523] mmc0: tried to reset card

    After the last message, the microSD seems to work correctly again.

    Have you any idea about the origin of this problem?

    Best Regards,
    Alessandro


Log in to reply
 

Looks like your connection to Community was lost, please wait while we try to reconnect.