<![CDATA[How to recover from a hard brick?]]>I would like to replace the uboot with my own custom one. Before i start working on it, i want to know how to recover if in case i accidentally brick it. Is the internal flash accessible over the SPI pins?

]]>http://community.onion.io/topic/4077/how-to-recover-from-a-hard-brickRSS for NodeMon, 20 Jul 2026 03:14:02 GMTWed, 18 Mar 2020 12:06:12 GMT60<![CDATA[Reply to How to recover from a hard brick? on Wed, 18 Mar 2020 12:06:12 GMT]]>I would like to replace the uboot with my own custom one. Before i start working on it, i want to know how to recover if in case i accidentally brick it. Is the internal flash accessible over the SPI pins?

]]>http://community.onion.io/post/21387http://community.onion.io/post/21387Wed, 18 Mar 2020 12:06:12 GMT<![CDATA[Reply to How to recover from a hard brick? on Wed, 18 Mar 2020 15:17:37 GMT]]>@user5456
Official Onion Omega2 Documentation Updating the Bootloader
I'm afraiid - using this method - you can flash (update/restore) Omega2's UBoot with a well working UBoot.

Is the internal flash accessible over the SPI pins?

It depends.
You have an Omega2S+ module on a Development Board where the SPI pins of the modul's on-board flash are exposed to MOSI, MISO, CLK, CS0.
So - in this case - the answer is (most probably) YES.

]]>http://community.onion.io/post/21388http://community.onion.io/post/21388Wed, 18 Mar 2020 15:17:37 GMT