We have upgraded the community system as part of the upgrade a password reset is required for all users before login in.

Running Asterisk on Omega 2S+



  • Hi,
    I am trying to run Asterisk on omega 2S+.
    I downloaded the telephony package from open wrt by editing the distfeeds.conf file.
    I am able to download and then i tried installing Asterisk13.
    I am able to install and run the Asterisk on omega.
    I was even able to connect to the CLI of asterisk running on omega.
    I used the command asterisk -r for connecting & it's connected successfully.

    Now I want to connect a sip softphone locally.
    I am stuck here. Can anyone guide me how to do this.

    I modified the users.conf and extensions.conf file and added the sip users.
    But still i am unable to register my sip softphones.
    One more thing I observed is pjsip.conf file is missing in etc/asterisk.
    (do i need to create one by myself? Or is there any flags that I need to set before,I am installing the asterisk?)
    I am not sure if I have missed any configuration settings.

    Hardware/Software used:
    Onion Omega 2S+
    Firmware Version: 0.3.2 b233
    openwrt 18.06-SNAPSHOT
    asterisk 13.20.0

    Can anyone give me any pointers on this issue??
    Any assistance on this would be much appreciated.
    Thanks.



  • Any pointers on this??



  • @Rohit-P There are some topics on the OpenWrt forum that cover this, here is a step by step

    https://forum.openwrt.org/t/how-to-install-and-configure-a-full-voip-server-asterisk-13-16-on-openwrt/44362/3



  • @crispyoz Thank You.! Will Look into this


Log in to reply
 

Looks like your connection to Community was lost, please wait while we try to reconnect.