<![CDATA[MimeEnqueueForRecv errors]]>When I connect to the Omega2 via serial port, I get a ton of these errors, at a frequent rate, maybe 1 per minute.
Doesn't seem to have any relationship to what I'm doing; they continue to build up when I'm idle.

What doe it mean?
Where does it originate?
How can I fix it or silence it?

Thanks!

e867936d-639d-44d2-ae1b-1233e435c20c-image.png

]]>http://community.onion.io/topic/4422/mimeenqueueforrecv-errorsRSS for NodeFri, 14 Aug 2026 19:40:34 GMTSat, 20 Feb 2021 19:42:25 GMT60<![CDATA[Reply to MimeEnqueueForRecv errors on Sat, 20 Feb 2021 19:42:25 GMT]]>When I connect to the Omega2 via serial port, I get a ton of these errors, at a frequent rate, maybe 1 per minute.
Doesn't seem to have any relationship to what I'm doing; they continue to build up when I'm idle.

What doe it mean?
Where does it originate?
How can I fix it or silence it?

Thanks!

e867936d-639d-44d2-ae1b-1233e435c20c-image.png

]]>http://community.onion.io/post/23265http://community.onion.io/post/23265Sat, 20 Feb 2021 19:42:25 GMT<![CDATA[Reply to MimeEnqueueForRecv errors on Sun, 21 Feb 2021 02:52:23 GMT]]>@dbell The message suggests there is an issue with your wifi connection, try changing to a different channel.

In /etc/config/wireless you will have a section like this:

config wifi-device 'radio0'
option type 'ralink'
option variant 'mt7628'
option country 'US'
option hwmode '11g'
option htmode 'HT40'
option channel 'auto' <---------------------------
option disabled '0'
option device_mode 'apsta'
option op_mode 'preference'

Try changing to a static channel, channels 1, 6 and 11 are 3 common choices as they have no overlap.

You can use these commands:

uci set wireless.radio0.channel=11
uci commit wireless
service restart network

]]>http://community.onion.io/post/23266http://community.onion.io/post/23266Sun, 21 Feb 2021 02:52:23 GMT