<![CDATA[Using USB HUB to use two web cameras]]>I need to project two WEB cameras at the same time, based on the example https://onion.io/streaming-video-over-wifi/, I can see one of the cameras but when using the mjpeg-streamer command for the second camera it generates mistake. I add the output of the command.

mjpg_streamer -i "/usr/lib/input_uvc.so -d /dev/video1 -r 640x480 -f 15" -o "/usr/lib/output_http.so -p 8081 -w /www/webcam1"
MJPG Streamer Version.: 2.0
i: Using V4L2 device.: /dev/video1
i: Desired Resolution: 640 x 480
i: Frames Per Second.: 15
i: Format............: JPEG
i: TV-Norm...........: DEFAULT
o: www-folder-path...: /www/webcam1/
o: HTTP TCP port.....: 8081
o: username:password.: disabled
o: commands..........: enabled
Unable to start capture: No space left on device
i: Error grabbing frames
]]>http://community.onion.io/topic/4977/using-usb-hub-to-use-two-web-camerasRSS for NodeThu, 08 Oct 2026 13:33:58 GMTTue, 18 Apr 2023 18:09:13 GMT60<![CDATA[Reply to Using USB HUB to use two web cameras on Tue, 18 Apr 2023 18:09:13 GMT]]>I need to project two WEB cameras at the same time, based on the example https://onion.io/streaming-video-over-wifi/, I can see one of the cameras but when using the mjpeg-streamer command for the second camera it generates mistake. I add the output of the command.

mjpg_streamer -i "/usr/lib/input_uvc.so -d /dev/video1 -r 640x480 -f 15" -o "/usr/lib/output_http.so -p 8081 -w /www/webcam1"
MJPG Streamer Version.: 2.0
i: Using V4L2 device.: /dev/video1
i: Desired Resolution: 640 x 480
i: Frames Per Second.: 15
i: Format............: JPEG
i: TV-Norm...........: DEFAULT
o: www-folder-path...: /www/webcam1/
o: HTTP TCP port.....: 8081
o: username:password.: disabled
o: commands..........: enabled
Unable to start capture: No space left on device
i: Error grabbing frames
]]>http://community.onion.io/post/25389http://community.onion.io/post/25389Tue, 18 Apr 2023 18:09:13 GMT<![CDATA[Reply to Using USB HUB to use two web cameras on Thu, 20 Apr 2023 04:20:27 GMT]]>@kamiloade How much space do you have available? use df -h

]]>http://community.onion.io/post/25395http://community.onion.io/post/25395Thu, 20 Apr 2023 04:20:27 GMT<![CDATA[Reply to Using USB HUB to use two web cameras on Thu, 20 Apr 2023 14:08:30 GMT]]>@crispyoz Screen Shot 2023-04-20 at 9.06.27 AM.png
I only have mjpg-streamer installed. The application runs in C, it uses very little memory.

]]>http://community.onion.io/post/25396http://community.onion.io/post/25396Thu, 20 Apr 2023 14:08:30 GMT<![CDATA[Reply to Using USB HUB to use two web cameras on Thu, 20 Apr 2023 19:47:59 GMT]]>@kamiloade might be a memory issue

Try running free -h at 3 different times and comparing:

  1. baseline - before you start mjpg-streamer for the first webcam
  2. after starting mjpg-streamer for the first webcam
  3. after mjpg-streamer for the second webcam

Maybe also check how much space is available in /tmp at each of those points

]]>http://community.onion.io/post/25397http://community.onion.io/post/25397Thu, 20 Apr 2023 19:47:59 GMT<![CDATA[Reply to Using USB HUB to use two web cameras on Thu, 20 Apr 2023 21:52:50 GMT]]>@Lazar-Demin

This is with streaming turned off
Screen Shot 2023-04-20 at 4.32.39 PM.png
This is with streaming from the first camera
Screen Shot 2023-04-20 at 4.34.57 PM.png
This is with streaming from the second camera
Screen Shot 2023-04-20 at 4.36.34 PM.png

The consumption is approximately 5MB and 6.2MB. the available memory is much higher so I don't think the problem is RAM.

I did the same test on an Omega 2+ and the error persists.

]]>http://community.onion.io/post/25398http://community.onion.io/post/25398Thu, 20 Apr 2023 21:52:50 GMT<![CDATA[Reply to Using USB HUB to use two web cameras on Mon, 24 Apr 2023 14:26:27 GMT]]>@kamiloade Hmm yeah, I agree, RAM is probably not the problem here.
Is there any way to get more verbose output from mjpg streamer? Maybe that will point you in a better debugging direction

]]>http://community.onion.io/post/25402http://community.onion.io/post/25402Mon, 24 Apr 2023 14:26:27 GMT<![CDATA[Reply to Using USB HUB to use two web cameras on Tue, 25 Apr 2023 13:14:41 GMT]]>@Lazar-Demin
I can't find a way to debug mjpg_streamer unless I do a clean build.
According to the official page, the program supports multiple cameras and I see that it does not present a problem.
I found in several forums the same problem and apparently it could be a problem when compiling the kernel with respect to the USB driver. Is there a way to validate the USB port configuration of the Onion omega 2?

]]>http://community.onion.io/post/25407http://community.onion.io/post/25407Tue, 25 Apr 2023 13:14:41 GMT<![CDATA[Reply to Using USB HUB to use two web cameras on Tue, 25 Apr 2023 15:04:01 GMT]]>@kamiloade said in Using USB HUB to use two web cameras:

Is there a way to validate the USB port configuration of the Onion omega 2?

Definitely! Our build system is 100% open source and available at https://github.com/OnionIoT/source

Follow Step 1 from the README to setup the build system, and then you can run make menuconfig to look at all of the configuration in depth.

]]>http://community.onion.io/post/25409http://community.onion.io/post/25409Tue, 25 Apr 2023 15:04:01 GMT<![CDATA[Reply to Using USB HUB to use two web cameras on Wed, 24 Jan 2024 04:05:15 GMT]]>I am facing the similar issue as @kamiloade . It says no space left on device when using two usb cameras. Did anyone find the solution to this please??

]]>http://community.onion.io/post/25794http://community.onion.io/post/25794Wed, 24 Jan 2024 04:05:15 GMT<![CDATA[Reply to Using USB HUB to use two web cameras on Wed, 24 Jan 2024 08:23:08 GMT]]>@kamiloade my first suspicion is that it is writing to the same file for both cameras, do you know where the files are being written? Or otherwise the two cameras are trying to create files/temp file that do exceed the device capacity. Have you looked at where these files are being written?

]]>http://community.onion.io/post/25795http://community.onion.io/post/25795Wed, 24 Jan 2024 08:23:08 GMT