@crispyoz Thanks for that, but unfortunately, the pad came off with it. I guess I will just do the same thing and solder it on FW_RST pin.
Best posts made by jmztaylor
Latest posts made by jmztaylor
FW_RST on expansion dock
My reset button got broken off. Is there a pin on the expansion dock that I can use as the same function. I know pin 38 on the 2+ does the job. And thats how I am doing it now. I used a multimeter and couldn't find one, so just wanted to make sure I wasn't just overlooking something. Would just be easier if I could use a button on my breadboard.
RE: USB flashing error USB - ERROR: CTL:TIMEOUT
Thanks for this. Unfortunately, I could never get the USB drive to mount. But that did give me an idea to throw it on the sdcard and mount that. And that worked perfectly. So thanks for giving me a nudge in the right direction.
USB flashing error USB - ERROR: CTL:TIMEOUT
I am compiling Omega2+ software and I made a few changes that caused a kernel panic. So I am trying to flash back to stock using USB flashing method. It will detect the USB drive in the bootloader and start reading the file but it will error out with a timeout. The other post I found has a solution of custom firmware that fixes it but due to my issue of not being able to boot this is not feasible. I have tried at least 5 different USB drive all from different manufactures with the same end result. The drive is partitioned to only have a single 1GB partition formatted to FAT32 with omega2.bin being the firmware filename.
Any assistance to get this working would be appreciated. In the meantime I have ordered ethernet expansion to do a web recovery.