How to install 'OAuth' for PHP
Ok so I am progressing...
I have installed PHP Version 5.6.8 and wish to use the PHP OAuth Extention to use the Twitter API but it says Class 'OAuth' not found.
I'm new to Linux so unsure what command I need to type in to install it.
Can anyone help please?
Hi @Brian-Moreau, OAuth in PHP is supplied by the PECL package. Can you try installing it with the following commands:
opkg update opkg install php5-pecl
Unknown package 'php5-pecl' root@Omega-2774:/# opkg update Downloading http://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/packages/base/Packages.gz. Updated list of available packages in /var/opkg-lists/chaos_calmer_base. Downloading http://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/packages/base/Packages.sig. Signature check passed. Downloading http://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/packages/packages/Packages.gz. Updated list of available packages in /var/opkg-lists/chaos_calmer_packages. Downloading http://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/packages/packages/Packages.sig. Signature check passed. root@Omega-2774:/# opkg install php5-pecl Unknown package 'php5-pecl'. Collected errors: * opkg_install_cmd: Cannot install package php5-pecl. root@Omega-2774:/#
Ok so I ran an 'opkg list' command and got listed 100's of packages.
PECL is not there...
Another forum suggested I might need PEAR?
This is a list of most of the PHP packages...
php5-mod-calendar - 5.6.8-1 - Calendar shared module php5-mod-ctype - 5.6.8-1 - Ctype shared module php5-mod-curl - 5.6.8-1 - cURL shared module php5-mod-dom - 5.6.8-1 - DOM shared module php5-mod-exif - 5.6.8-1 - EXIF shared module php5-mod-fileinfo - 5.6.8-1 - Fileinfo shared module php5-mod-ftp - 5.6.8-1 - FTP shared module php5-mod-gd - 5.6.8-1 - GD graphics shared module php5-mod-gettext - 5.6.8-1 - Gettext shared module php5-mod-gmp - 5.6.8-1 - GMP shared module php5-mod-hash - 5.6.8-1 - Hash shared module php5-mod-iconv - 5.6.8-1 - iConv shared module php5-mod-json - 5.6.8-1 - JSON shared module php5-mod-ldap - 5.6.8-1 - LDAP shared module php5-mod-mbstring - 5.6.8-1 - MBString shared module php5-mod-mcrypt - 5.6.8-1 - Mcrypt shared module php5-mod-mysql - 5.6.8-1 - MySQL shared module php5-mod-mysqli - 5.6.8-1 - MySQL Improved Extension shared module php5-mod-openssl - 5.6.8-1 - OpenSSL shared module php5-mod-pcntl - 5.6.8-1 - PCNTL shared module php5-mod-pdo - 5.6.8-1 - PHP Data Objects shared module php5-mod-pdo-mysql - 5.6.8-1 - PDO driver for MySQL shared module php5-mod-pdo-pgsql - 5.6.8-1 - PDO driver for PostgreSQL shared module php5-mod-pdo-sqlite - 5.6.8-1 - PDO driver for SQLite 3.x shared module php5-mod-pgsql - 5.6.8-1 - PostgreSQL shared module php5-mod-session - 5.6.8-1 - Session shared module php5-mod-shmop - 5.6.8-1 - Shared Memory shared module php5-mod-simplexml - 5.6.8-1 - SimpleXML shared module php5-mod-soap - 5.6.8-1 - SOAP shared module php5-mod-sockets - 5.6.8-1 - Sockets shared module php5-mod-sqlite3 - 5.6.8-1 - SQLite3 shared module php5-mod-sysvmsg - 5.6.8-1 - System V messages shared module php5-mod-sysvsem - 5.6.8-1 - System V shared memory shared module php5-mod-sysvshm - 5.6.8-1 - System V semaphore shared module php5-mod-tokenizer - 5.6.8-1 - Tokenizer shared module php5-mod-xml - 5.6.8-1 - XML shared module php5-mod-xmlreader - 5.6.8-1 - XMLReader shared module php5-mod-xmlwriter - 5.6.8-1 - XMLWriter shared module php5-mod-zip - 5.6.8-1 - ZIP shared module
@Brian-Moreau They might have removed the package from the latest build. Are you familiar with the cross compile environment? You should be able to compile the php5-pecl package with the following make file:
# # Copyright (C) 2011-2014 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. # See /LICENSE for more information. # define Package/php5-pecl/Default SUBMENU:=PHP SECTION:=lang CATEGORY:=Languages URL:=http://pecl.php.net/ MAINTAINER:=Michael Heimpold <firstname.lastname@example.org> DEPENDS:=php5 endef define Build/Configure ( cd $(PKG_BUILD_DIR); $(STAGING_DIR_HOST)/usr/bin/phpize ) $(Build/Configure/Default) endef CONFIGURE_ARGS+= \ --with-php-config=$(STAGING_DIR_HOST)/usr/bin/php-config define PECLPackage define Package/php5-pecl-$(1) $(call Package/php5-pecl/Default) TITLE:=$(2) ifneq ($(3),) DEPENDS+=$(3) endif endef define Package/php5-pecl-$(1)/install $(INSTALL_DIR) $$(1)/usr/lib/php $(INSTALL_BIN) $(PKG_BUILD_DIR)/modules/$(subst -,_,$(1)).so $$(1)/usr/lib/php/ $(INSTALL_DIR) $$(1)/etc/php5 ifeq ($(4),zend) echo "zend_extension=/usr/lib/php/$(subst -,_,$(1)).so" > $$(1)/etc/php5/$(subst -,_,$(1)).ini else echo "extension=$(subst -,_,$(1)).so" > $$(1)/etc/php5/$(subst -,_,$(1)).ini endif endef endef
Thanks for that Boken Lin
I assume I have to save the above code as a file?, of type? somewhere? on the device then run it with MAKE?
Sorry I really know nothing about Linux or OpenWtr
@Brian-Moreau You first need to set up a cross-compile environment: https://wiki.onion.io/Tutorials/Cross-Compile. Then you will need to go into the
feedsdirectory, and create a directory there. Inside the directory, you will put the Makefile. Then when you go to compile the package, you will use the
make menuconfigtool to select the
php5-peclpackage for compilation. From there, you will have the choice to build it directly into a firmware or build it as a separate package that you can then install on your Omega.
Hope this helps!
Danny van der Sluijs
@Boken-Lin Thank you as your name is popping up all over the community with very good answers. I've tried to do as you suggested but not quite there yet. I'm trying to achieve the same here to install peel which seems to need the cross compile. I made it to the step make menuconfig and am able to set the initial options (Target system, subtarget, Target profile). Then it becomes unclear.
I've create the folder php5-pecl in the feeds directory. Inside I've created the Makefile.
But I can find the php5-pecl in the make menuconfig options.
Any tips or idea's ...?
@Danny-van-der-Sluijs Can you post the content of your
Makefile? I believe there's a configure in there that allows you to set which category you will be placing the package under.
Hi Sorry I am still totally lost...
I don't seem to be able to run the first command to setup the Cross-Compile Environment.
If I type ....
$ apt-get install -y subversion build-essential libncurses5-dev zlib1g-dev gawk flex quilt git-core unzip libssl-dev
I get $ not found, or if I just start command with apt-get .... I get apt-get not found error.
I have tried this from both the control panel command line interface and the serial interface.
What is the $ at the beginning of the commands and why is my device not recognising it?
Hi @Brian-Moreau, It seems that you are trying to setup the cross-compile environment on the Omega. You need to set it up on a Linux computer. The cross-compile environment is an environment that allows you to compile source code to Omega-specific binary. Since the Omega itself doesn't have a huge amount of computational resource, it is usually done on a desktop (or laptop) computer.
Do you know how to setup a virtual machine? We can walk you through the steps.
Hi again @Boken-Lin ,
I very much appreciate your help and assistance in this since it is not strictly an Omega problem.
Ok I am using WINXP PC and have in the past made dual boot so I should be able to manage to do that again but just wonder if you would recommend which virtual machine would be best for working with the Omega?
@Brian-Moreau I have had a lot of success running a KUbuntu 14.04 VM in a VirtualBox VM under Windows
Hi again @Broken-Lin
Ok I made some progress...
I installed KUbuntu on another computer.
I have followed steps 1 and 2 for setting up the Cross Compile Platform and all is good.
I now have the following prompt..
I am now at Step 3: Update Feeds but unsure what to do?
I typed cd feeds to go to the feeds directory but it says no such file or directory.
Thanks in advance
@Brian-Moreau Some small bits of clarification that may help:
- There is no directory feeds - feeds is a script file in the directory scripts under your openwrt directory
- The file feeds.conf.default that needs modifying referred to in Step 3 of the tutorial is in your openwrt directory
- The command to be run as described in Step 3 i.e.:
scripts/feeds update -a
should be run from your openwrt directory.
It runs the feeds script that is in the scripts directory.
- All other commands covered in the tutorial should similarly just be run from the openwrt directory
Do you know how to setup a virtual machine? We can walk you through the steps.
This would be great been thinking about doing this while I wait on my second Omega. Could you be so kind as to post the steps for setting up VM?
@Rudy-Trujillo First you will need to get and install a copy of VirtualBox. This can be found at: https://www.virtualbox.org/wiki/Downloads
Then you will need an OS image to run on the VirtualBox - most commonly used for Omega work seems to be KUbuntu.
There are two ways to do this:
- The hard way: download an ISO of the KUbuntu version you want (these can be found here: http://www.kubuntu.org/getkubuntu/). Then create a VM instance in VirtualBox that you install to from the ISO image - i.e. set the VM up to boot from the ISO image as a CD/DVD and follow the installation process. When that is complete, disconnect the VM from the ISO image and when you reboot the VM, you should be running the installed system.
- The easy way: Download a pre-installed VirtualBox VM image for the version you want. I would suggest the one that can be obtained from here: https://virtualboximages.com/Kubuntu+15.04+amd64+VirtualBox+VDI+Virtual+Computer
Then just open it using VirtualBox and you will be running the pre-installed system.
@Rudy-Trujillo A PS to my previous message: some people prefer VMWare over VitualBox.
A free copy of VMWare can be found at: https://my.vmware.com/web/vmware/info?slug=desktop_end_user_computing/vmware_workstation/10_0
The principle of VMWare is pretty much the same as VirtualBox
I am less familiar with the availability of pre-installed VMWare images and you may have to do a google search for one.