gps receiver not locking



  • @Dana-Myers114 Thanks for the tip, desoldering and re-soldering did the trick, mine also had a solder blob where shouldn't be. It's now working fine.



  • @Dana-Myers114 said in gps receiver not locking:

    @Douglas-Kryder the other thing I did that may be notable, after desoldering the antenna from the PCB, is clearing excess solder from the antenna left over from when it was originally soldered to the PCB. In particular, one corner of the LNA shield (on the bottom of the antenna) is cut-away, but when it was soldered to the PCB, this corner was filled with solder and shorted to a pad/via on the LNA board. I cleared that on all of my 3 GPS Exps as part of the R&R and did not re-fill it when re-mounting the antenna. Given the shield is cut-away there, I believe it's not meant to short to the pad and this may be deafening the LNA.

    thank you. i'll look for that on mine when i do the de-solder/solder work.



  • @Endre-Czirbesz said in gps receiver not locking:

    @Dana-Myers114 Thanks for the tip, desoldering and re-soldering did the trick, mine also had a solder blob where shouldn't be. It's now working fine.

    That's 2 now, with an desolder and re-solder, seemingly working well so I think I'll try mine soon. Just visually the antenna on mine is crooked and seems 'blobbed' as well so hoping once I get the chance, I'll see if mine also helps.

    Thank you all!



  • Does anyone have a photo or better description of where the blob is?



  • As more confirmation.. Before I unsolder and resolder this ceramic antenna I wanted to first try a suitable external antenna I picked up off fleaBay.

    I had an SMA to uFL connector bridge from some other MCU antenna's for WiFi so I just picked up an Active 28db antenna that ran me about $8 usd and as soon as I plugged it in within seconds it had both a 2D and 3D fix with accurate data.

    Now that I know the u-blox MCU works; it must be something with the built in antenna and the soldering, as others have found out. I might get some time to desolder and resolder the ceramic one or just use the external for now.

    Something's up with the Omega antenna on how it's placed, affixed or logic on board before antenna (ie: that missing or removed cap)

    Thanks for everyone!
    ~Icky



  • I had a reply to my ticket now. It confirms that the removed cap is already missing from my board.



  • I desoldered the antenna and removed the excess blobs, and just tac-soldered it back down.

    It locks reliably using usb and ublox u-centre, but switching to the Omega2+ and putting it in exactly the same position it can "see" 2-6 satellites (varies widely) and never locks position.

    A previous post said the GPS expansion on an original Omega never locked and it was put down to interference from the omega and dock itself. I'm beginning to think this is still true on the Omega2. Moving the antenna away from the omega makes it work



  • With the latest update to ogps I am now able to lock onto a satellite.

    UPDATE: Unfortunately I only managed to lock onto a GPS once.



  • Months passed and still no solution... unable to lock :angry: .



  • I think the issue is either software related or hardware specific to the Omega dock. If I connect the GPS expansion to a Raspberry Pi I can lock onto a satellite.



  • nothing nothing :/ ...

    I see new products but nothing about the "old" bugged products (GPS)? An answer ? A correction? A replacement? ???

    It's not serious! Is there a sales manager here? A technician?


Log in to reply
 

Looks like your connection to Onion Community was lost, please wait while we try to reconnect.