Issue with Omega2 pitch
When trying to create this part https://docs.onion.io/omega2-docs/omega2p.html, we notiched that the pitch we made the part to was 1.25mm, as per the datasheet.
- One shows our manufactured board with the pitch of 1.25mm. You can see the pins are slightly offset
- The second showing the datasheet with 1.25mm, and on the right, a DXF file with pitch 1.27 mm.
It seems the pitch should then be 1.27mm? Is the datasheet wrong?
If you are talking about the distance between two pins of Omega2 - it is 2.00 mm (typically).
See also: https://github.com/OnionIoT/technical-drawings/blob/master/Mechanical/OM-O2.PDF