On/Off switch fell off
This post is deleted!
Hi @Rudy-Trujillo, really sorry about that! Did your switch break off in the ON position or the OFF position?
@Rudy-Trujillo Unfortunately this is a common enough problem as testified by multiple other posts :-(
There are three possible solutions:
- Try to turn the switch on using a pin - I had to do that on my mini dock
- Add solder bridges to the switch connection to make it permanently on - see other posts
- Obtain a suitable replacement switch and replace the existing one with it - again see other posts
Not a great experience, but this happened to mine as well. I was able to use an exacto knife and hook enough of what remained of the switch to flip it into the 'on' position.
pau cucart galbis
Me too I broke the ignition switch in the OFF position . I Use a needle to move the switch to the ON position.
@Kit-Bishop @Rich-Rector @pau-cucart-galbis Sorry about the terrible experience :( This problem will be addressed in the next manufacturing run. We have added a new criteria for QA, which is to test the switch to make sure that it does not break easily.