We have upgraded the community system as part of the upgrade a password reset is required for all users before login in.

Which pins for OLED



  • I'm building an IoT device which includes the OLED module but the OLED mounted about 3 inches away from the connector on the power board. Since I have limits space in the product casing I'm trying to avoid using a ribbon cable, so I want to just connect the pins required for the OLED module. I'm a programmer not an electronics guy so I'm not sure which pins I need to connect and rather than guess and blow the thing up, I thought I'd ask. 🙂

    Thankyou!



  • @crispyoz If you are talking about Onion's OLED Expansion then read this post please:
    Connect oled expansion and omega 2+ only



  • Thanks Gyorgy,

    That worked for me.

    I wish the Omega OLED expansion was better designed because the display sits level with the top of the soldered pins making it impossible to embed the module in a casing.


Log in to reply
 

Looks like your connection to Community was lost, please wait while we try to reconnect.