Posts made by Alexey Avdyukhin
RE: b188: WiFi works but very unstable/slow
@Alexey-Avdyukhin that's strange...
What kind of router are you using?
And can you run
wifisetup debugand post the output?
Asus RT-N16 (on Broadcom BCM4718A1 chip)
b188: WiFi works but very unstable/slow
I just upgraded to b188 with Warp Core. WiFi works but pings are very high and with losses:
I has stable 1ms ping on b160 firmware with the same hardware.
So my Omega2's connection is VERY slow and near unusable. Can I disable Warp Core for now somehow?
RE: [almost resolved..] curl: (27) PRNG seeding failed
curl 7.52.1 (mipsel-openwrt-linux-gnu) libcurl/7.52.1 mbedTLS/2.5.1 Protocols: file ftp ftps http https Features: IPv6 Largefile SSL
from Onion's repo. Same problem :(
opkg install http://downloads.lede-project.org/snapshots/packages/mipsel_24kc/base/curl_7.54.1-1_mipsel_24kc.ipk opkg install http://downloads.lede-project.org/snapshots/packages/mipsel_24kc/base/libcurl_7.54.1-1_mipsel_24kc.ipk
Tool to access hardware PWM
Just created tool to access hawdware PWM on Omega2: https://github.com/ClusterM/omega2-pwm
For some reason Omega2 has not any util to control hardware PWM. There is only fast-gpio tool, it uses software PWM which is awful for sound generation.
Channel #0 is pin #18, channel #1 is pin #19. Channels #2 and #3 are available on Omega2S only (UART2 pins).
Before usage you must set GPIO muxing using omega2-ctrl tool:
omega2-ctrl gpiomux set pwm0 pwm
omega2-ctrl gpiomux set pwm1 pwm
Then use this tool:
pwm <channel> <frequency> [duty]
Example to generate 3000Hz on channel #1 with 50% duty:
pwm 1 3000 50
RE: Product not delivered and no response for my queries
Same problem. I placed my order on May #13, it's huge, costs $112.00. Still waiting for package.
But I can't even check order status. My card was charged, I received e-mail with order number (#5546). But https://onion.io/my-account/orders/ says "No order has been made yet".
Tried to contact support but has not received any answer for a week.