Is there a way to display the console on the OLED display? I had an idea of creating a writer with the omega and a wireless keyboard.
I am a user who is learning how to program through Ruby. I am also playing with my home network to create my personalized solution.
Posts made by files_copying
RE: Concept Case (Unofficial)
Here are my case pics. I had it done with PLA using a local printer through the 3dhubs site. Someone mentioned earlied that one corner is kind of tight. I experienced that also but it did close for me.
RE: NAS with Omega Onion
Update: Still looks like I am being blocked by a firewall. I thought the below ports were what I needed to open but I am learning IPtables as I practice with this experiment. I am going to spend tomorrow evening reading about iptables.
#Open TCP and UDP ports 111, 32777 through 32780 on firewall to allow NFS and NFSD
iptables -A INPUT -j ACCEPT -i wlan0 -s 192.168.113.0/24 -p tcp --dport 111
iptables -A INPUT -j ACCEPT -i wlan0 -s 192.168.113.0/24 -p udp --dport 111
iptables -A INPUT -j ACCEPT -i wlan0 -s 192.168.113.0/24 -p tcp --dport 32777:32780
iptables -A INPUT -j ACCEPT -i wlan0 -s 192.168.113.0/24 -p udp --dport 32777:32780
. /etc/init.d/portmap start
. /etc/init.d/portmap enable
. /etc/init.d/nfsd start
. /etc/init.d/nfsd enable
Original Post below @C1ARK-Gable This is not yet complete but I think only the firewall port is left from this point. NFS Server Sharing USB Fat32 Flash Drive Source:https://wiki.openwrt.org/doc/howto/nfs.server Test to see if USB device is recognized ``` [ 1276.480000] usb 1-1: new high-speed USB device number 4 using ehci-platform [ 1276.630000] usb-storage 1-1:1.0: USB Mass Storage device detected [ 1276.650000] scsi host2: usb-storage 1-1:1.0 [ 1277.660000] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 4 [ 1277.670000] sd 2:0:0:0: [sda] 15148608 512-byte logical blocks: (7.75 GB/7.22 GiB) [ 1277.680000] sd 2:0:0:0: [sda] Write Protect is off [ 1277.680000] sd 2:0:0:0: [sda] Mode Sense: 45 00 00 00 [ 1277.690000] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1277.720000] sda: sda1 [ 1277.730000] sd 2:0:0:0: [sda] Attached SCSI removable disk root@Omega-24C8:/# ``` If USB Drive support is needed. Otherwise continue on. ``` opkg install kmod-usb2 opkg install kmod-usb-storage-extras ``` Ran into a kernel mismatch problem. Forcing to verify setup will work. ``` opkg install --force-depends nfs-kernel-server ``` Mount device ``` mount /dev/sda1 /mnt ls /mnt ``` Export the directory. My test method shown is INSECURE. It allows anyone to mount and write. ``` vi /etc/exports ``` Copy and paste the following line: ``` /mnt *(rw,sync) ``` Then press `ESC`, then `:wq` to save and exit out of `vi`. Reload and apply changes ``` exportfs -ar ``` Switch to other computer now ``` mount onionomega:/mnt /mnt ``` I hit this wall so far. I have to sleep now but will put some more time in it tomorrow evening after work. I think I have to open a port on the onion. ``` $ sudo mount -vvv onionomega:/mnt /mnt/usb/ mount.nfs: timeout set for Sun Dec 13 20:25:19 2015 mount.nfs: trying text-based options 'vers=4.2,addr=192.168.113.10,clientaddr=192.168.113.15' mount.nfs: mount(2): Connection refused mount.nfs: trying text-based options 'addr=192.168.113.10' mount.nfs: prog 100003, trying vers=3, prot=6 mount.nfs: portmap query retrying: RPC: Program not registered mount.nfs: prog 100003, trying vers=3, prot=17 mount.nfs: portmap query failed: RPC: Program not registered mount.nfs: requested NFS version or transport protocol is not supported ```