After a long break I've tried to launch my Omega 2+ with Power Dock 2. It was working, and configured.
I've noticed that I have no Wi-FI from Omega and only solid amber LED from the begging.
I've tried to connect to console via FTDI cable with specs found here but console is blank.
So I've ensured that RX from FTDI is linked to Power Dock TX1, and accordingly TX to RX1
For sure I'm choosing correct COM port because while cable RX and TX wired together I've got chars on console output.
I've tried to Factory Reset but after 10s (or even more) of holding Reset Button nothing happened.
Same thing is when I hold Reset Button while powering up. Amber Diode flashing until i hold Reset Button, than once button is released become solid I should have bootloader menu but nope. Black console.
Direct connection of FW RST pin to 3V3 for approx. 10s to reset device also gave no results.
Do you guys have any idea what should I do to re-flash device?
I've found that console output are on RX0 TX0. so I solder wires to those pins. but blank console