RESOLVED: OLED expansion doesn't display anything



  • So I've finally brought out my OLED expansion from the initial kickstarter. I performed a firmware update on my Omega. Without the OLED expansion plugged in, I get errors in the command prompt and web admin tool that no expansion can be found. With it plugged in, I do not get these errors. However, neither the command tools nor the web interface will display anything on the screen. Do I just have a faulty display? Is there something I'm missing?



  • Hi there! If you have a hardware or software issue, please see these guidelines first. A list of previously resolved issues is available here.

    See top of page!



  • Thanks for that, completely missed it. I've tried plugging it in directly, non-directly (stacked on relay board) and even just using power and data lines using a bread board and it wouldn't work. Waited a while and stacked it again and now it's working. No idea what changed, pretty sure I did my last firmware update before this post.
    @Luciano-S. said in OLED expansion doesn't display anything:

    Hi there! If you have a hardware or software issue, please see these guidelines first. A list of previously resolved issues is available here.

    See top of page!


Log in to reply
 

Looks like your connection to Onion Community was lost, please wait while we try to reconnect.