Enterprise network problem
I'm trying to get my Omega2+ connected to my wifi enterprise connection at work but I can't find a guide. It appears the wiki page for it is currently down but I did find this guide for an older Omega version.
[link text]https://onioniot.github.io/wiki/Tutorials/Connecting-to-Enterprise-Secured-Wifi(link url)
Unfortunately it doesn't appear to work as, despite actually being the same 'eduroam' network my device fails to connect.
My work settings are
EAP method: PEAP
Phase 2 auth: MSCHAPV2
CA cert: don't validate
and they work on my phone so I don't know quite what the issue is.
Does anyone have any suggestions? I did try to remove wpad-mini and install wpad but it was already installed, I may have already done that part previously but I don't think so.
What is the default /etc/config/wireless script? I stupidly didn't make a copy and can't find it listed anywhere!
Anyone got any suggestions?
What is the default /etc/config/wireless script?
You should find it at '/rom/etc/config/wireless' - it's a config file not a script.
Cheers, now I've found it, any idea what a default clean config file looks like before you run wifi config ?
I've spent most of the day trying to get this to work, is there anything you can see wrong with my config?
option device 'radio0'
option mode 'sta'
option network 'wwan'
option eap_type 'peap'
option ssid 'UOS_SECURE'
option encryption 'wpa-eap'
option auth 'mschapv2'
option identity 'aw0016'
option password '*********'
option disabled '0'
I followed the link you suggested but I've already replaced wpad-mini with wpad and still no luck with my connection.
I really can't get my head around the syntax of the config file, should I have a config wifi-config section in addition to this?
Does anyone have a link to a copy of this page as it seems dead at the moment?
[link text]https://wiki.onion.io/Tutorials/Connecting-to-Enterprise-Secured-Wifi(link url)
maybe this link helps, if you have not already seen it.
@Andrew-Walker Unfortunately I can't try / reproduce your problem now.
I guess you should modify these sections of the 'wireless' file
config wifi-device 'radio0' (???) and config wifi-iface 'sta'.
If I were you I would read "every" wireless howto on OpenWrt - for example at least this one: Wireless Utilities
Maybe this tutorial also helps you Connecting to School Wifi (MSCHAPv2 Auth Type)
(As you know '/etc/config/wireless' changed after FW version v0.1.10 b160.)