Omega2S+ sys_led pin
Does anyone know which pin is sys_led on Omega2S? I can't find it in the docs.
@crispyoz GPIO 43 - it's pin 18 according to pin numbering of Omega2S(+) Data Sheet Version 1.6
BTW Onion Omega2 Pro The Amber Status LED section of Official Omega2 Documentation has a typo:
The Omega LED uses GPIO44, and can be programmed to do a number of cool things.
GPIO 44 ie. pin 19 controls only the WLED - the WiFi Status LED
[Edited] on an Omega2 Pro board with the present FWs (up to b232).
@György-Farkas I suspected it is Pin 43 based up on the Omega 2 Pro schema but I don't see it in the datasheet.
Already have pin 44 in use.
For the Omega2 Pro and LTE, we changed GPIO44 to be a wifi status LED and moved the system status led to GPIO43. This is only valid for Pro and LTE firmware since this change was made in the DTS files for these two boards.
@Lazar-Demin Yes, you are right the Omega's System Status LED pin is not determined by the hardware. I assumed @crispyoz was talking about [Omega2S+ and Omega2 Pro].
And there's a typo in Onion Omega2 Pro The Amber Status LED section of the documentation. ;)