Arduino Dock powering issue
I have successfully burned the bootloader but I have issues with powering Onion module using the Arduino dock.
Micro USB cable plugged into the Micro USB port of Arduino dock, dock's yellow led is ON and blinking, but there is no 3.3V on the Onion module's 3.3V pin.
Did I miss something to get Onion work together with Arduino dock?
@Peter-Kedvessy can you post a picture of your setup?
My setup is exactly the same like https://i.imgur.com/B47pqlW.jpg
Nothing special: Onion in the dock, Micro USB cable plugged into the Micro USB.
@Peter-Kedvessy The Omega's LED doesn't come on at all? Have you tried using this particular Omega in a different dock?
I have no issue with Oninon in a different dock eg in the mini dock.
Onion's LED is off and have never started to blink in the Arduino dock.
@Peter-Kedvessy Very odd, can you post some photos of the front and back of the Arduino Dock?
Btw, the board is the Omega, the team behind it is Onion :)
Hehe, sorry about the bad naming :-)
Here you can find some pics about my Arduino dock: https://www.dropbox.com/sh/qtuljk0lxgfwk4e/AAAkdtSN6Obzvyd_RMM2UJzia
Quality might be low, I can send some better pics later if necessary.
Thanks for checking them!
@Peter-Kedvessy can you take a shot at about 45˚ so that it's visible how the Omega is plugged into the socket?
@Lazar-Demin Sure, pics has been added to the gallery above.