@Kit-Bishop said in 3D files of boards for case design.:

• The link for the Arduino Dock 2 (https://raw.githubusercontent.com/OnionIoT/technical-drawings/master/Mechanical/OM-D-ARD.PDF) leads to drawings which are clearly for the original Arduino Dock, not for the Arduino Dock 2

So, I would support the comment from @patrick-gunderson asking for ALL the drwaings to be made available

+1 on this. A pity omega1 and 2 are messed up in some documentation.
like if everything related to the omega2 was just a quick hurry fix of the whole page

OK my bad.
i installed arduino-dock instead of arduino-dock-2 ...
doing opkg remove arduino-dock and then opkg install arduino-dock-2 makes the flashing work again.

the wiki should really inform beginners there are TWO different arduino packages

damn it worked ! thanks a lot.
i was not aware you need to run this EVERYTIME after a reboot !

anyone ?

Hi
i have my dropbox apptoken
when i paste it into the form for timelapse saving there is an infinite loading

am i doing something wrong ?

anyone ?

Hi
i have my dropbox apptoken
when i paste it into the form for timelapse saving there is an infinite loading

am i doing something wrong ?

thanks for your answer.
Actually i wished to send data to unity3d.
but seems i foudn an alternative solution.

Hello
everything is in the title.
i see my webcam stream via this page :
http://192.168.x.xx:8080/?action=stream

but i want to grab the video feed in a program i'm building now (on android)
is there any possibility to obtain anything else than this output ?
for example be able to receive the stream as an IMAGE (with an extension like .jpg or any other) instead of such more elaborate url ?

thanks in advance

@Victor-Iriciuc great thanks. let me know please.
what is the url of this ticket platform ?

Re: Arduino Dock not working

Hi Victor
seems we have the same problem http://community.onion.io/post/15186
happy to not be alone. i also tried like everything (except bootloading because i just have the Arduino dock 2)

But i seems that you went further and even this didn't solved the problem, so i can spare more headaches.

[O2+ with Arduino Dock 2]
After leaving the Onion take dust for over 8 months because of this problem i gave it a try today ..
No success ... i was reading this thread again from the whole beginning and tried litteraly everything.

i confirm that :

• all this was done on a fresh new installation of last Onion firmware
• i added the lines in boards.txt (as you can see further my arduino IDE recognises the board)
  i use arduino 1.8.5 but anyway even via ssh with the ino in /root/ folder i have the same damn error
• i have AvrDude 6.1 installed (not the newest from LEDE package)

Still the same error i had 9 month ago, directly in SSH or on Arduino IDE

i don't have the buggy AVR-dude from later versions (LEDE Package Repos are commented out) / i have v 6.1

ANYWAY => same error, in IDE like in SSH

HELP ! i tried everything, spend hours having an headache because of this ...

The only thing i didn't do is to try to flash again the bootloader
(because i just have the Arduino dock and it would be a pain in the ass to put these wires on ICSP ...
anyway it might not solve the problem
this procedure : https://wiki.onion.io/Tutorials/Arduino-Dock/Initial-Setup#arduino-dock-setup_using-the-omega-expansion-dock-with-the-arduino-dock-icsp-header

do anyone did this ? flash the ArduinoDock2 from Onion2 while the onion is currently on that dock ?

I beg for help im desperate. I backed Onion to be able to use it with Arduino and it does not work.
is it possible that the dock or arduino itself is defectuous ?

@Christoph-Derndorfer said in I2C IIC 128X64 OLED LCD LED Display + Python:

@frederic-raducki Hey, did you make any progress on this topic? While I've now already ordered the OLED expansion I'm still considering getting the OLED screen from Upgrade Industries (since it's easily available at a maker store down the road) you had mentioned and playing around with it in the meantime.

So any advice and recommendations would be much appreciated.

sorry nope. since Arduino AVR dude does not work my Onion2 is collecting dust and i learn Raspberry gpios

@Ls-Song said in 3D files of boards for case design.:

For instance the Arduino expansion board has no screw holes and makes it difficult to mount on something else...

+1 on this! still awaiting ArduinoDock model desperately.

@rutayan-patro said in Omega 2 and Arduino dock.:

Sketch uses 5042 bytes (15%) of program storage space. Maximum is 32256 bytes.
Global variables use 199 bytes (9%) of dynamic memory, leaving 1849 bytes for local variables. Maximum is 2048 bytes.

Flashing application '/tmp/sketch.hex' ...

ERROR, flash NOT successful
Flash complete!
avrdude: AVR device not responding
avrdude: initialization failed, rc=-1
Double check connections and try again, or use -F to override
this check.

avrdude done. Thank you.

No luck

you have the same error as me right ?
i ordered another omega2 on indieGogo .. i hope that wen i receive it i will be able to compare if my 2nd still has the same issue ...
for now i just dont use the Omega and i purchased a RaspberryPi3 to learn meanwhile i have a fix for Avrdude