@ccs-hello Thank you, this worked perfectly. I can't solder very well, so I used shorter wires and hooked up 2 220 uf capacitors. It booted like a charm.
Posts made by River Lewis
My Omega 2+ won't boot! (first time setup)
I just got my Omega 2+ in the mail. I didn't get a dock, so I plugged it into a breadboard power regulator like this set to 3.3v plugged into a wall wart. The wall wart is supplying 9v into the power supply. I've checked the power with my multimeter and found a steady 3.3 volts. When I turn on the power, the led flashes once briefly, then a few seconds later, flashes again. There is no network. Is this fixable, and if not, is there a way to get a replacement? This is the first time it's ever been plugged in.