Omega2 LTE just launched!


  • administrators

    We're very excited to announce that the Omega2 LTE is now available for pre-order on Crowd Supply!

    Explore cellular IoT with a high speed 4G LTE data connection, GNSS global positioning, WiFi networking, and a Linux environment.

    Learn more and pre-order at https://www.crowdsupply.com/onion/omega2-lte

    omega2 lte



  • Any hope for a PPS output from the GPS receiver? The Quectel website requires a login to see the modem datasheet. Any hope for an OpenWRT PPS driver via an unused GPIO? I really love the Omega, but software support other than standard OpenWRT packages and high level language interpreters like Python is really lacking. I'm looking for GPS with accessible 1PPS and integration with ntpd and audio capture at 48 or 96kHz. From my understanding there is only one serial port and that is used for the console, so the only way to interface GPS would be a USB serial port adapter, unless this modem provides NMEA output via a built in USB to serial port adapter.

    Does the modem connect via USB of some sort?



  • @Lazar-Demin just noticed that there is no expansion header pin reference at all printed on the board. bad choice, imo. very unfriendly. is onion planning on printing up a small cheat sheet reference card that slips over the header to provide info? if not, another bad choice.



  • @Douglas-Kryder said:

    @Lazar-Demin just noticed that there is no expansion header pin reference at all printed on the board.

    Ooh, good catch!
    Also, since there's no longer a diagonal corner to act as a visual guide, the expansions are at risk of being installed in an incorrect orientation by those new to the board.
    And, since the expansion header is so close to the edge, when inserted, the expansions are bound to overlap the edge of the board underneath, so enclosures will have to be designed accordingly.



  • @Lazar-Demin said in Omega2 LTE just launched!:

    https://www.crowdsupply.com/onion/omega2-lte

    A question - why is the global version $19 more expensive? I'm not asking to whinge, I'd just like to know what the difference is between the boards..

    slán



  • @chris-Ó-Luanaigh asked:

    A question - why is the global version $19 more expensive?

    I'd expect that the chip in the global model that supports all the additional bands is more expensive.



  • Any hope for support of 100% unattended operation? By that I mean that the device always recovers from any kind of HW and SW issues? I have had Omega2s stop working where only a power cycle would recover (the reset input is process by software so if somehow the OS goes away the reset never performs), Also, my own code could stop working itself (yes, it is possible to add a lot of safeguard, monitoring functions, etc.).

    I real production grade unattended operation capable product need to have a watchdog. Here, the only solution due to lack of hard reset on the Omega, is to have the watchdog perform a power cycle should it timeout. Is there anything of that nature on this module?

    Also, I am looking at the MAX16998 to drive a MOSFET on the ground return of the omega. But is there a simpler solution? Any suggestions?


  • administrators

    Great list of questions, I'll do my best to answer:

    GPS Receiver Details & PPS Output

    Correct, the LTE modem is connected to the Omega through USB. The GNSS receiver is built into the modem and communicates with the Omega using NMEA messages serially over USB.

    Regarding the Omega's serial ports, the Omega2S module features 3 UARTs:

    • UART0 is used for the console and is connected to the USB-to-Serial chip -> USB-C port on the Omega2 LTE
    • UART1 is available and pinned out on the Expansion Header
    • UART2 is available. On the Omega2 LTE it can be accessed by running wires to the appropriate pins on the Omega2S module

    The GNSS receiver does not offer a PPS output. Would it be possible to use the NMEA messages to run the NTP server?

    Expansion Header

    Agreed, not having a pin reference for the Expansion Header is unfriendly.
    That's why on the production version, there will be a sticker on both sides of the Expansion Header providing a pin reference! :)

    Unattended Operation

    The Omega2S module does feature a Watchdog timer and a Hardware Reset pin, so unattended operation is definitely doable.

    On the software side, it's possible to use OpenWRT's init.d process management daemon to run your program as a service, ensuring your code will restart if it happens to crash. Learn more about this in our blog post on running a program as a service.



  • @Lazar-Demin said in Omega2 LTE just launched!:

    Omega2S module does feature a Watchdog

    When I wrote Omeage2s in meant the plural as I have many. Also I was under the impression that the Omega2S and Omega2S+ were simply repackaged regular Omega2/+. But I guess there are few additions.

    The documentation indicates that the HW reset pin is only on the Omega2S+, not the Omegae2S. But this cell thing is stuff with the + variant so it is covred.

    OTOH, the documentation does not talk about the watchdog. Can you point me in the right direction?

    Yes, init.d can be a partial solution. But about init.d itself? (Issues are most of the time software bugs, but there is definitely other type of issues that could cause init.d to fail).



  • @Lazar-Demin
    Will there be any SMS or USSD libraries provided with the Omega2 LTE to take advantage of the GSM functionality?
    Or do you have any suggestions for some open source ones that will be compatible with it?



  • @Douglas-Kryder Unofficial Omega2 LTE Expansion Header cheat sheet:
    0_1559290052746_Omega2_LTE_Expansion_Header.png


    Official Onion Expansion Dock & Omega2 Pro Expansion Header:
    0_1559295928953_Omega2_Pro_Expansion_Header.png



  • Omega2-LTE

    https://github.com/OnionIoT/Omega2-LTE

    @Lazar-Demin Thank you very much indeed - especially for the Omega2-LTE/Hardware/R1.1/ files.


    Please upload the missing PCB layer(s) - or at least the bottom layer - of the Omega2 Pro too.



  • @György-Farkas another useful contribution, thank you. only problem i have now is my color printer died 2 months ago. but my b&w laser will be ok until i can afford color again. :)


  • administrators

    SMS Messages

    While the main intended use-case for the cellular connection is the use of high-speed mobile data, this is very likely possible by sending AT commands from the Omega to the cellular modem. I would recommend looking for the AT command reference for the EC25 cellular modem.

    An alternative to sending SMS messages directly from the Omega2 LTE would be to use the data connection to communicate with an online service like Twilio to programatically send text messages.

    Omega2 & Omega2S

    Correct, the surface-mount Omega2S is a repackaged version of the through-hole Omega2. Think of it as a super-set of the through-hole version, check out our documentation for a full list of the differences between the two models.

    Regarding the +/non-plus variants, it refers to the amount of memory and storage, no difference in the pinout.
    The hardware reset pin is available on all of the models. Look for the pin labelled RST on the pin-out diagrams.

    Watchdog & Unattended Operation

    For more info on using the watchdog, please consult the MT7688 datasheet. There are 3 registers that control the watchdog's operation, you can configure them through the /dev/mem device, or using the devmem program. You'll also need to look at the GPIO1_MODE register to adjust the pin multiplexing so that the WDT signal is brought out to the pins.

    You'll have to ask the OpenWRT developers about the stability of init.d :)
    FWIW, we've never seen any major stability issues in our experience.



  • @Lazar-Demin
    Could you please advise which variant of the Quectel EC25 will be used in the global model?

    From the pre-production images available it would seem that you are using EC25-A for the North American model, but I can't reliably determine which one you'll be using for the rest of the world, unless I have missed that item somewhere.

    Also, the images location referenced in the Omega2-LTE github repo README doesn't currently exist.

    If anyone is interested, here is the product page for the LTE module Quectel LTE Standard EC25 and there are a large number of documents available for download (after registration).



Looks like your connection to Community was lost, please wait while we try to reconnect.