[ASK]Communicate between Omega 2 Plus via WiFi (Full Duplex)

Alviansyah Arman · 12 Dec 2016, 19:55

Hi,
is it possible to communicate between Omega 2 plus (full duplex) via WiFi maybe some string data, and then send the data received to Serial output?

example case:
i have 2 omega 2 plus, each board connected to arduino uno via serial (RX/TX). in arduino i have 1 push button, and 1 LED, so if i push the button on arduino 'A' side, the led on arduino 'B' side will turn on and vice versa.

Thank You

fossette · 12 Dec 2016, 20:57

The feature you need is sending a datagram Internet packet (UDP) through a UNIX socket. There's an OpenWRT wrapper/helper that should be available for Omega2 as well. Here's a start for some info:
https://wiki.openwrt.org/doc/techref/libubox

Alviansyah Arman · 23 Dec 2016, 15:37

Thank you for your reply and the link!

i'll post if i succeed...just waiting for onion 2 to arrive...