We have upgraded the community system as part of the upgrade a password reset is required for all users before login in.

Help with Shadow updates to AWS



  • Following the advice here:
    mqtt

    I have the certificate, policy and end point defined I believe correctly.

    I did the setup step and copied the certificate and private key files to the Omega2+.

    I run:
    mosquitto_pub -t $aws/things/Omega-27BF/shadow/update -m '{"state": {"desired": {"temperature": 1 }}}' -q 1

    But the shadow properties do not get updated.

    There is no error. If I add the -s option to the mosquitto_pub command I see:

    Client mosqpub|30677-Omega-1F9 sending CONNECT
    Client mosqpub|30677-Omega-1F9 received CONNACK (0)
    Client mosqpub|30677-Omega-1F9 sending PUBLISH (d0, q1, r0, m1, '$aws/things/Omega-1F93/shadow/update', ... (43 bytes))
    Client mosqpub|30677-Omega-1F9 received PUBACK (Mid: 1)
    Client mosqpub|30677-Omega-1F9 sending DISCONNECT

    Do I need to start over because I have updated the firmware on the Omega 2+.?

    I am using certificate and policy files from Feb. 2018 when this guide worked for me.

    Suggestions appreciated.


Log in to reply
 

Looks like your connection to Community was lost, please wait while we try to reconnect.