Onion Tau stopped sending data...

[Anton Badovskyi]

Hi,
I wanted to use the Tau Lidar Camera in one of my projects and bought a few. I tested using your software () for three days, but after that the camera stopped giving data.

python -m TauLidarServer
Looking for connected Tau LiDAR Camera hardware ...

ToF camera opened successfully:
    model:      4.0
    firmware:   3.3
    uid:        9801FA
    resolution: 160x60
    port:       COM5
    IP address: 127.0.0.1
    URL:  http://127.0.0.1:8080

The camera responds to the connection and "blinks" when reading data.

distance.py

P.S.: Although I activated the camera for a maximum of 5 minutes, I noticed that it gets very hot.

[Anton Badovskyi]

... using your software () ... - TauLidarServer and examples

I searched for posts with similar situations, but did not find exactly this one.

[abdullahjhatial]

This post is deleted!

[abdullahjhatial]

@abdullahjhatial said in Onion Tau stopped sending data...:
did you resolve this issue ? i am also facing same issue ,