Hi @Lazar-Demin and @kevin-lefrank,

I tried every example, moved the folder to a different location and tried it again, tried different boud rates, long and short USB-C cables, and I still stuck on "Looking for connected Tau LiDAR Camera hardware ...", but I noticed that the hardware itself is getting hot, all LEDs are on but solid/no blink/no sign of date being transferred.

Thanks lads!!

Hi @kevin-lefrank, my TauLidar Server not even starts in the CMD, its stays there forever at "Looking for connected Tau LiDAR Camera hardware ..." loop

Hi lads!
So, after installing everything according to the step-by-step Guide, python 3.9, pip updated, Tau server, libraries and APIs installed, etc... and when trying to execute the "python -m TauLidarServer" command, it just stays there, indefinitely.
I'm not sure if I have a faulty Tau hardware, or my USB-C path/port isn't the correct one.

TauLidarCamera 0.0.3
TauLidarCommon 0.0.2
TauLidarServer 0.0.5
pip 21.1.3
Python 3.9.6
Win10

Tau Lidar connected to COM1 (USB\VID_0483&PID_5740\00000000001A
)

Status for device COM1:

Baud:            115200
Parity:          None
Data Bits:       8
Stop Bits:       1
Timeout:         OFF
XON/XOFF:        OFF
CTS handshaking: OFF
DSR handshaking: OFF
DSR sensitivity: OFF
DTR circuit:     OFF
RTS circuit:     ON