Omega2S SD Card / GPIO Pins

[Heath Robinson]

I designed my board using the SD GPIO pins to use as GPIO pins. In practice, it does not seem that I can get them to operate correctly. Can GPIO22-29 be used as normal GPIO pins? The documentation seems to indicate that they can. Do I need to do something with omega2-ctrl? Looking at the MediaTek documentation it seems like I might need to set some registers to get it to work. Any ideas?

[Simon Song]

to remove SD drive module
] rmmod mtk_sd

and get GPIO1-MODE register value (ref. MT7688 page 61, bit[11:10] , b00 -> b01)
] devmem 0x10000060 w
] 0x50054045 (example)

set SD -> GPIO mode
] devmem 0x10000060 32 0x50054445

and try GPIO22~29 access...

[Heath Robinson]

Thanks so much for your reply. I will give that a try. This will save a me a lot of time soldering jumpers on 6 groups of pins on 25 boards.

[Heath Robinson]

That worked. Thanks so much.