Oled Screen
-
Does anyone know how to use the oled screen?
-
I have mine as well. Will probably explore how to interface it over the weekend and post here about it if I do.
-
@files_copying We are still working on the driver for the OLED Expansion. If you know how to use Python, you can drive it with an older version of the library here: https://github.com/OnionIoT/Python-OLED. We are currently doing a more complete version of the library in C++, and should be able to release it in the next few weeks.
Cheers!
-
Thanks. I will start playing with this. The team at Onion has been quick to respond to any questions.
-
Since I only have the mini-dock, I was wondering where I can find the wiring diagram for the OLED expansion if I want to interface it to the Omega using a breadboard? I'm assuming it would be using I2C for communication?
-
@Boken-Lin the https://github.com/OnionIoT/Python-OLED script requires installing cffi which is not possible to do on openWRT, any ideas how to overcome this problem?
-
@Shamyl-Mansoor I like where you're going with this. I'm assuming you are waiting for a delayed battery dock too.
This could be a handy way to test in the interim! However I'll assume there's some sort of interface the dock brings, which is not included on the minidock
-
@Sawyer-McBride Yup you're right. I am also waiting for the battery dock! My idea was if there is some document for the pin layout of the OLED screen then I could use a breadboard for the OLED to Omega connections. I'm assuming it would use I2C. However I haven't been able to find any pinout diagram for the OLED expansion.
-
The GIT hub link to Python code mentions SSD1306. This is a I2C display. I have used this with a Ardiuno in the past. The pin out is, power, gnd, I2C and I2C clock. Take a look at this picture I found with Google.
If you have a voltmeter you should be able to buzz out the pins.
-
Hi @rahel, are you trying to use Python Mini? I believe the library works only with the full python package.
-
@Shamyl-Mansoor @Sawyer-McBride We're making a simple diagram to show you how to connect your mini dock to your OLED Expansion. We will post it in the next few hours.
Cheers!
-
@Boken-Lin Nice one! Loving the quick turn around with Onion!
-
@Boken-Lin Did you post the diagram yet?
-
@Garling-Beard Not yet. But we haven't forgotten you! Just waiting for a confirmation from our hardware guy to make sure you won't burn your Omega! I will post it as soon as he as confirmed.
-
@Boken-Lin Thanks
-
Edit: I made a mistake on the pin diagram. Please see below for the correct connection.
Sorry!
-
@Boken-Lin Thank you
-
Awesome!!
-
@Boken-Lin, are the red and black connections at the bottom of the diagram correct?
Comparing it to the diagram on the GPIO tool on the Console and the diagram of the Expansion dock, it looks like in this diagram, 2.8V of the Omega (black) is tied to GND of the Oled and GPIO26 of the Omega (red) is tied to 2.5V of the Oled.
The Green, gold and red connections at the top of the diagram make sense, as GPIO20 (I2C_SCL), GPIO21 (I2C_SDA) and 3.3V.
-
@Scott-Smith You are absolutely right! My mistake. I missed the left-most pin on the bottom row of pins on the Omega. This is the correct one:
