1. Home
  2. Omega Talk
  3. Problem with usb stick

Problem with usb stick

  • B

    @Mike What happens if you execute the command, and plug in the USB key without rebooting?

    0 Mike 1 Reply
  • Mike

    @Boken-Lin -- Sorry for the delayed reply.. I removed the USB, ran the previous command, re-inserted the USB drive, and ran dmesg. The same "read/64, error -71" error shows up.

    [ 4309.190000] usb 1-1: new full-speed USB device number 6 using ehci-platform
[ 4309.410000] usb 1-1: device descriptor read/64, error -71
[ 4309.730000] usb 1-1: device descriptor read/64, error -71
[ 4309.960000] usb 1-1: new full-speed USB device number 7 using ehci-platform
[ 4310.180000] usb 1-1: device descriptor read/64, error -71
[ 4310.500000] usb 1-1: device descriptor read/64, error -71
[ 4310.730000] usb 1-1: new full-speed USB device number 8 using ehci-platform
[ 4311.210000] usb 1-1: device not accepting address 8, error -71
[ 4311.330000] usb 1-1: new full-speed USB device number 9 using ehci-platform
[ 4311.810000] usb 1-1: device not accepting address 9, error -71
[ 4311.810000] usb usb1-port1: unable to enumerate USB device

    Edit: I noticed the new firmware version b234. I ran oupgrade -force to bring the Omega up-to-date from b233.

    I ran the previous command (echo Y > cat /sys/module/usbcore/parameters/old_scheme_first) again, re-inserted the USB drive, and dmesg shows the same -71 error.

    [  255.130000] usb 1-1: new full-speed USB device number 6 using ehci-platform
[  255.350000] usb 1-1: device descriptor read/64, error -71
[  255.670000] usb 1-1: device descriptor read/64, error -71
[  255.900000] usb 1-1: new full-speed USB device number 7 using ehci-platform
[  256.120000] usb 1-1: device descriptor read/64, error -71
[  256.440000] usb 1-1: device descriptor read/64, error -71
[  256.670000] usb 1-1: new full-speed USB device number 8 using ehci-platform
[  257.150000] usb 1-1: device not accepting address 8, error -71
[  257.270000] usb 1-1: new full-speed USB device number 9 using ehci-platform
[  257.750000] usb 1-1: device not accepting address 9, error -71
[  257.750000] usb usb1-port1: unable to enumerate USB device
    0 B 1 Reply
  • B

    @Mike What a resistant issue! And we don't even know where to begin... The computer that you are testing it on, which operating system is it running?

    0 Mike 1 Reply
  • Mike

    @Boken-Lin -- Yes, it is! I'm SSH'ing in from different SSH clients on ChromeOS (Toshiba Chromebook 2), Windows 7 (Putty), and an Android phone (ConnectBot). I also get the same errors when connected via USB Serial with Putty on Windows 7.

    0 B 1 Reply
  • B

    @Mike I mean, you mentioned that your USB devices work on your other machines, which OS are those? Would you be able to set up a Ubuntu virtual machine to try out the USB drive? I'm guessing that the keys might not be set up properly. Do you know which filesystem you formatted the keys to?

    0 Mike 1 Reply
  • Mike

    @Boken-Lin - I've used the drives on all of my systems besides the Android Phone. They are formatted with FAT.

    I have Ubuntu running as chroot on my Chromebook. Here's the output from dmesg when connecting a USB drive to the Chromebook's Debian (Jessie) chroot.

    [14729.462277] xhci_hcd 0000:00:14.0: setting latency timer to 64
[14729.899571] usb 1-2: new high-speed USB device number 25 using xhci_hcd
[14729.914967] usb 1-2: New USB device found, idVendor=13fe, idProduct=3600
[14729.914980] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[14729.914989] usb 1-2: Product: USB DISK 2.0
[14729.914996] usb 1-2: Manufacturer:         
[14729.915002] usb 1-2: SerialNumber: 7FB61C007B08005C
[14729.916323] usb-storage 1-2:1.0: USB Mass Storage device detected
[14729.916484] usb-storage 1-2:1.0: Quirks match for vid 13fe pid 3600: 4000
[14729.916829] scsi8 : usb-storage 1-2:1.0
[14730.943441] scsi 8:0:0:0: Direct-Access              USB DISK 2.0     DL07 PQ: 0 ANSI: 0 CCS
[14731.334298] sd 8:0:0:0: [sda] 8028160 512-byte logical blocks: (4.11 GB/3.82 GiB)
[14731.335365] sd 8:0:0:0: [sda] Write Protect is off
[14731.335378] sd 8:0:0:0: [sda] Mode Sense: 23 00 00 00
[14731.336453] sd 8:0:0:0: [sda] No Caching mode page found
[14731.336464] sd 8:0:0:0: [sda] Assuming drive cache: write through
[14731.340901] sd 8:0:0:0: [sda] No Caching mode page found
[14731.340913] sd 8:0:0:0: [sda] Assuming drive cache: write through
[14731.358413]  sda: sda1
[14731.366815] sd 8:0:0:0: [sda] No Caching mode page found
[14731.366828] sd 8:0:0:0: [sda] Assuming drive cache: write through
[14731.366839] sd 8:0:0:0: [sda] Attached SCSI removable disk

    I also get the same read/64, error -71 error when connecting a webcam to the Onion.

    [ 2275.320000] usb 1-1: new full-speed USB device number 32 using ehci-platform
[ 2275.540000] usb 1-1: device descriptor read/64, error -71
[ 2275.860000] usb 1-1: device descriptor read/64, error -71
[ 2276.090000] usb 1-1: new full-speed USB device number 33 using ehci-platform
[ 2276.310000] usb 1-1: device descriptor read/64, error -71
[ 2276.630000] usb 1-1: device descriptor read/64, error -71
[ 2276.860000] usb 1-1: new full-speed USB device number 34 using ehci-platform
[ 2277.340000] usb 1-1: device not accepting address 34, error -71
[ 2277.460000] usb 1-1: new full-speed USB device number 35 using ehci-platform
[ 2277.940000] usb 1-1: device not accepting address 35, error -71
[ 2277.940000] usb usb1-port1: unable to enumerate USB device
    0 B 1 Reply
  • B

    @Mike Ok, perhaps there's some issue with the configuration of the USB. Can you perform an upgrade of the firmware, then do a factory reset of the Omega (You can do a factory reset by pressing on the reset button for about 30 seconds, and wait for the Omega to restart). This will overwrite all files on the omega, so please backup anything you may need.

    0 Mike 1 Reply
  • Mike

    Hi @Boken-Lin,

    I've upgrade the firmware to b236 and did a factory reset with /usr/sbin/factory-reset -f. Still getting the same error -71.

    Here's the output from USB Serial connected with Putty..

    http://pastebin.com/VsVRj8zb

    0 B 1 Reply
  • B

    Hi @Mike, can you take a picture of your setup? There might be something that's not correctly connected. Let's see if we can identify it visually.

    1
  • Mike

    Sorry for the late reply. I finally got around to taking a few pictures of the board.

    I'm still having the same issue, and the Omega is running on the latest firmware.

    I did notice one pin on the header was left unsoldered, there doesn't seem to be a trace going there though. I tried to add some solder there, but there isn't a pad for it to adhere to. Still the same errors after attempting, and after a fresh factory reset too.

    Close-Up of the Omega: https://imgur.com/a/Ep7ic

    Codename:	 Ando
Model:	         Onion Omega
Revision:	 R1
Firmware:	 0.1.4 (b330)
Latest Firmware: 0.1.4 (b330)        

    [  372.690000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  374.400000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[  600.720000] usb 1-1: new full-speed USB device number 2 using ehci-platform
[  600.940000] usb 1-1: device descriptor read/64, error -71
[  601.260000] usb 1-1: device descriptor read/64, error -71
[  601.490000] usb 1-1: new full-speed USB device number 3 using ehci-platform
[  601.710000] usb 1-1: device descriptor read/64, error -71
[  602.030000] usb 1-1: device descriptor read/64, error -71
[  602.260000] usb 1-1: new full-speed USB device number 4 using ehci-platform
[  602.740000] usb 1-1: device not accepting address 4, error -71
[  602.860000] usb 1-1: new full-speed USB device number 5 using ehci-platform
[  603.340000] usb 1-1: device not accepting address 5, error -71
[  603.340000] usb usb1-port1: unable to enumerate USB device
    0
usb storage 21
Log in to reply
 

Looks like your connection to Community was lost, please wait while we try to reconnect.