help! sysupgrade bin error omega2 not working

[ripsy mobedu]

128 MB
relocate_code Pointer at: 87f60000
flash manufacture id: c2, device id 20 19
find flash: MX25L25635E
*** Warning - bad CRC, using default environment

============================================
Onion Omega2 UBoot Version: 4.3.0.3

ASIC 7628_MP (Port5<->None)
DRAM component: 1024 Mbits DDR, width 16
DRAM bus: 16 bit
Total memory: 128 MBytes
Flash component: SPI Flash
Date:Oct 18 2016 Time:17:29:05

icache: sets:512, ways:4, linesz:32 ,total:65536
dcache: sets:256, ways:4, linesz:32 ,total:32768
CPU freq = 575 MHZ
Estimated memory size = 128 Mbytes
Resetting MT7628 PHY.
Initializing MT7688 GPIO system.

---

• Hold Reset button for more options *

---

Boot Linux from Flash NO RESET PRESSED.

Booting image at bc050000 ...

Bad Magic Number,01000000

[Larry Pinney]

Wow...you've been waiting a month?
Speedy service huh?

Try the Web Upgrade or the USB upgrade.

Using the serial console...
Hold the Reset button down and use the switch to power it on.

Please select option:

[ Enter ]: Boot Omega2.
[ 0 ]: Start Web recovery mode.
[ 1 ]: Start command line mode.
[ 2 ]: Flash firmware from USB storage.

http://repo.onion.io/omega2/images/omega2p-v0.1.7-b140.bin

USB Upgrade
Rename the downloaded firmware to omega2.bin
Place that file on a USB Stick with a formatted with a Micro$oft file system...EXFAT (the de facto standard) should be OK.
However NTFS will not work for this application.

Then use Option 2 ...